Design and Fabrication of Remote Controlled Multi-Axis Operation theatre BED
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 1
Abstract
The idea of this paper targets severely injured patients who have to be operated upon immediately. In critical cases, the patient is advised not to be moved frequently; but moving him from the stretcher to the operation theatre table is inevitable. Hence wheels have been attached to the table itself for easy movement. The wheels can be locked when surgery is being performed, so that the table is steady. The need not be moved or turned on the table to operate on the affected parts; this is accomplished by giving rotation to the table to the required angle. The model of this work has four degrees of freedom. It has one linear motion and three rotational motions. The bed is divided into three parts. Two micro-controller units are used along with an IR-TSOP1738 transmitter and IR-TSAL7300 receiver in a remote control system. Using this, the parts can be individually turned or titled to the required angle. The other merits of using this bed include; the patient need not be shifted to another bed after surgery, as the model serves the purpose of operation theatre table and a bed, the patient himself can adjust the bed to his comfort, regular monitoring of the patient is done by incorporating temperature sensors. The main objective of the paper is to develop a wireless remote to operate the multi axis operation theatre table.
Authors and Affiliations
B. Govinda Reddy*
Keywords
Related Articles
- EP ID EP138100
- DOI -
- Views 106
- Downloads 0
DETAILED STUDY OF WEB MINING APPROACHES-A SURVEY
This paper is a work on survey on the existing techniques of web mining and the issues which are related to it. The WWW i.e. World Wide Web acts as an interactive and trendy way to transfer information. The enormo...
BLUETOOTH BASED AUTOMATION SYSTEM WITH SECURED ACCESS
This project aims at providing an efficient low cost and wireless Data acquisition and control system. This concept uses Bluetooth technology to access and control the RTU(Remote terminal) through a mobile or a co...
ANALYSIS OF EARTHQUAKE LOADS ON G+7 STOREYED BUILDING WITH CONCETRIC BRACING SYSTEM AND ECCENTRIC BRACING SYSTEM USING RESIST SOFTWARE
The proposed project is to analyze the performance of G + 7 multi storied building for lateral forces, (seismic/wind). Work was carried out considering seismic zones (II, III, IV and V) and hard, medium, soft type...
Analysis and Status Indication of DVOR Equipment Using Digital Transmission
It is well know that airports are very much habituated with radiations which results in corruption of original signals with noise. In an airport like Visakhapatnam Airport where the communication is still dependen...
RSA Processors Based On High
Depends on various requirements the paper presents & optimized Rivest processor which satisfies circuit area, operating time. we also introduces 3 multiplier based data path using different intermediate data...