Design and Implementation of 1kva Uninterrupted Power Supply
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 2
Abstract
The power conditioner designed to deliver an output of 1.0KVA basically it’s composed of a battery control circuit, the inverter and automatic voltage regulator. The inverter stage is the part that will take power from the battery and by means of switching circuits inverts the d.c to a.c and steps up from 12V to 220V at the output. The automatic voltage regulator is the part whose function is to regulate the output from the inverter and mains to the load (i.e. 220V). The third stage is the control circuit, this uses a relay to sense when there is power or not, for economic reasons the same transformer used for inversion and battery charging. When there is power the relay switches such that the transformer is in step down mode and by means of full wave diode rectification supplies d.c to charge the battery. And when there is loss of power, the relay sense loss of power and switches to inversion mode and in this mode the transformer serves as a step up i.e. stepping 12V from battery to 220V. The output of transformer was equipped with several taps, which by means of a control circuit connected to several relays that selects which of the tap is best approximated to 220V at the output.
Authors and Affiliations
Oshevire Patrick
Keywords
Related Articles
- EP ID EP158867
- DOI -
- Views 72
- Downloads 0
DESIGN OF HIGH SPEED SUBTHRESHOLD INTERCONNECTS USING MCML TECHNIQUE
The recent trend in the VLSI industry toward miniature designs, low power consumption, and increased growth of portable applications compels researchers to design circuit having high speed. This is achieved by...
Framing Fuzzy Rules using Mamdani Model for Effective Sickle Cell Diagnosis
In the world of medicine fuzzy logic play an important role in medical field for effective diagnosis. Fuzzy system has been effectively applied to solve the problems, classification and modeling in significant num...
EFFECT OF OCCUPATIONAL STRESS IN INDUSTRIES
Stress may be defined as a situation where in factors interact with a worker to change (i.e. disrupt or enhance) his/her psychological and/or physiological conditions, such that the person is forced to deviate fro...
Study Of Influence Of Micro Structural Parameters On Workability And
The present paper deals with the influence of percentage metakaolin (0, 10, 20 and 30 replacing cement by water-binder ratio (0.325, 0.35, 0.375 and 0.40) and the aggregate compressive strength of HPC. The experi...
A Bidirectional Data Centric Routing Protocol To Improve The Energy Efficiency In Wireless Sensor Networks
Wireless sensor network (WSN) is made up of spatially distributed autonomous sensors to monitor physical or environmental conditions and cooperatively pass their data through the network to a main location. Wireless se...