DESIGN AND MODELING OF PASSIVE COMPONENTS OF LINEAR PATH OF OPTICAL COMMUNICATION
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 11
Abstract
It was conducted the analysis of structural construction of the organization schemes of the optical communication with passive components, i.e, optoelectronic switch and the device of precision positioning of the radiation direction. Based on the analysis it was concluded that the existing components did not provide high accuracy of switching and positioning the direction of the optical radiation, which leads to loss of energy when entering the optical radiation into the optical fiber at the points of mechanical connection. For this purpose, it was developed the organization scheme of the optical communication with passive components, design scheme, the control scheme and mathematical model of functioning of the optoelectronic switch and the device of precision positioning of the direction of optical radiation. It was shown that the developed optoelectronic switch and the devices of precision positioning of the direction of radiation could reduce the time and improve the accuracy of the switching and positioning of the optical radiation direction, to compensate the loss at the mechanical connection places and commissioning of the radiation into the fiber optic cable within 3...5 dB, which is 50...55 % less than in the known devices. These devices offer significant advantages over the electro and magneto-electric deflection systems, which include low power consumption, high accuracy, reliability and manufacturability. This suggests that the proposed construction can find its use in modern optical communication systems.
Authors and Affiliations
T. M. Mansurov
Keywords
Related Articles
- EP ID EP139024
- DOI 10.5281/zenodo.165009
- Views 55
- Downloads 0
COMPARATIVE ANALYSIS OF SOLID INK DENSITY, PRINT CONTRAST AND PRINT GLOSS OF METALIZED BOARD PRINTED WITH SHEET FED OFFSET PRINTING PROCESS AND DRY TONER BASED DIGITAL PRINTING PROCESS
Metalized boards are frequently used in the packaging industry. In our study, we compare the Print properties of metalized board printed with the primer coat on sheet fed offset and dry toner based digital printing proce...
Study of Artificial Roughness in Condenser Tube used in Household Refrigerator: A Review
Enhancement techniques based on artificial roughness are used in numerous applications of condenser such as: the flow regime (Reynolds number), the fluid properties (Prandtl number), with and without fouling, the...
N E W I N VE S T I GAT IO N ON TH E APP L I CA T IO N S A N D COMP U TE R S I M UL A TI ON OF PHO TO VOLT A I C C EL L S A N D S TO RA GE S Y S T EM S
A complete model is proposed as a tool to simulate and optimize photovoltaic cells and storage systems. The normalized form of the equations with respect to the battery capacity allows us to generalize its use for...
Grid Interconnection of Renewable Energy Sources with Power-Quality Improvement Features
A Power quality problem is an occurrence of nonstandard voltage, current or frequency that results in a failure or a misoperation of end user equipments. Utility distribution networks, sensitive industrial loads a...
Study of Different Parameters in Seamless Cold Drawing Process Using Finite Element Simulation
The application of steel tubes especially with close tolerances and good dimensional accuracy, in hydraulic cylinders for different applications makes in a point of interest for various designers. In this paper ef...