DETECTION OF BEARING FAULT USING VIBRATION ANALYSIS AND CONTROLLING THE VIBRATIONS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 4, Issue 10
Abstract
In today’s world we were more concerned with reducing the cost of failure and maintenance in any industry as per schedules of each machine and determined by the exact running condition of each major machinery components used in industries like power plants, chemical plants and automotive industries that require precise and efficient performance. Condition monitoring of these machine components like bearings, shafts and shaft mountings and installation of machine was important to avoid failures. Several techniques were available and vibration monitoring was one of them. Vibration monitoring and analysis was one such tool that can be used for determining the condition of a rotating machine and its analysis. Vibration analysis gets much advantage in factories as a predictive maintenance technique. In this study, vibration response of the rolling bearings to the defects on outer race, inner race and the rolling elements is obtained and analyzed. It shows that every defect excites the system at its characteristic frequency. The location of the faults is indicated by the FFT spectrum. Defects are indicated at motor and fan both bearings in horizontal direction. In situ dynamic balance was implemented by adding weight to reduce rate of vibrations.
Authors and Affiliations
P. Venkata Vara Prasad*
Keywords
Related Articles
- EP ID EP148655
- DOI -
- Views 63
- Downloads 0
Comparative Studies on Performance Parameters and Exhaust Emissions from Two Stroke Copper Coated Spark Ignition Engine with Alcohol Blended Gasoline with Catalytic Converter
Experiments were conducted to evaluate the performance and control the exhaust emissions from two-stroke, single cylinder, spark ignition (SI) engine, with alcohol blended gasoline (80% gasoline, 10% methanol, 10% ethan...
DYNAMIC TIME TABLE GENERATION SYSTEM FOR COLLEGE
The class timetabling problem is a typical scheduling problem that appears to be a verytedious job in every academic institute. Time table scheduling is done manually with single person or group of persons involved in t...
UNDERGROUND CABLE FAULT DISTANCE LOCATOR BY USING MICROCONTROLLER
This paper conclude that the underground cable fault location model by using microcontroller. The purpose of project is to identify the cable fault distance from initial position in terms of kilometer. By using simple m...
RFID Technology and its Application Areas: A Review Paper
Radio frequency identification is a contactless technique that uses the radio waves to identify the object uniquely. RFID Tag and Reader are major two parts of the RFID System. Tags are used to store the informati...
AUTOMATIC CAR LICENSE PLATE EXTRACTION
License plate extraction is an important stage in the vehicle license plate recognition for an automated transport system. This paper presents a novel and practical license plate extraction algorithm based on the...