Dynamic additional loads influencing the fatigue life of gears in an electric vehicle transmission
Journal Title: Frattura ed Integrità Strutturale - Year 2014, Vol 8, Issue 30
Abstract
In recent years the implementation of the electric engine in the automotive industries has been increasingly marked. The speed of the electric motors is much higher than the combustion engine ones, bringing transmission gears to be subjected to high dynamic loads. For this reason the dynamic effects on fatigue life of these components have be taken into account in a more careful way respect to what is done with the usual gears. In the present work the overload effects due to both speed and meshing in a gear couple of an electric vehicle transmission have been analyzed. The electric vehicle is designed for urban people mobility and presents all the requirements to be certified as M1 vehicle (a weight less than 600 kg and a maximum speed more than 90 Km/h). To investigate the overload effects of teeth in contact, the reference gear design Standards (ISO 6336) introduce a specific multiplicative factor to the applied load called Internal Dynamic Factor (Kv). Aim of this work is to evaluate how dynamic overloads may influence the fatigue life of the above quoted gears in term of durability. To this goal, Kv values have been calculated by means of the analytical equations (ISO 6336 Methods B and C) and then they have been compared with the results coming from multibody simulations, involving full rigid and rigid-flexible models.
Authors and Affiliations
G. Belingardi, V. Cuffaro, F. Currà
Keywords
Related Articles
- EP ID EP88938
- DOI -
- Views 57
- Downloads 0
Crack path for run-out specimens in fatigue tests: is it belonging to high- or very-high-cycle fatigue regime?
Fatigue tests run-out specimens up to 106 – 5x107 load cycles are used to determine the stress level named “fatigue limit”. Nevertheless, it is not clear what kind of fatigue cracking takes or will take place in t...
Studio delle prestazioni di giunzioni incollate ibride
Le giunzioni ibride sono giunzioni in cui coesistono due differenti tipologie di giunzione, di cui una è l’incollaggio. L’articolo mostra i risultati di una campagna sperimentale volta a caratterizzare le prestazioni di...
Crack initiation and fracture features of Fe–Co–B–Si–Nb bulk metallic glass during compression
The aim of the paper was investigation crack initiation and fracture features developed during compression of Fe-based bulk metallic glass (BMG). These Fe-based BMG has received great attention as a new class...
Delamination of carbon-fiber strengthening layer from concrete beam during deformation (infrared thermography)
Technology of strengthening reinforced concrete structures with composite materials has found wide application. The effectiveness of strengthening of concrete structures with externally bonded reinforcement is supp...
Estimation of fatigue lifetime for selected metallic materials under multiaxial variable amplitude loading
This paper initially investigates the accuracy of two methods, i.e., the Maximum Variance Method (MVM) and the Maximum Damage Method (MDM), in predicting the orientation of the crack initiation plane in three...