Effect of Additives on Electrical Resistivity of Pulp Black LiquorSawdustBlends
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 1
Abstract
Abstract: Unlike the large scale paper mills which use the pulp black liquor (PBL) for recovery of chemicals, the small and medium mills usually throw away the black liquor after pulping, leading to pollution problems. Furthermore, sawdust wastes (SDW) produced from factories leads to a big problem. The objective of this study is to determine the effect of natural binders (wax and starch) on the thermal conductivity and electrical resistivity of black liquor-sawdust composites. Surface analysis of samples was studied. Results from Cyclic voltammetry and electrochemical impedance spectroscopy techniques demonstrated that addition of starch and wax increases electrical resistivity of black liquor-sawdust composites.
Authors and Affiliations
Rasha A. Ahmed
Optimization of WEDM Process Parameters on Titanium Alloy Using Taguchi Method
This paper describes an optimum cutting parameters for Titanium Grade5 (Ti-6Al-4V) using Wire-cut Electrical Machining Process (WEDM). The response of Volume Material Removal Rate (MRR) and Surface Roughness (Ra)...
To Study the mechanical properties of coconut coir fiber reinforced with epoxy resin AW 106 & HV 953 IN
In this study the Mechanical Properties of Coconut coir Fiber is reinforced with epoxy resin of different lengths (5mm,10mm,15mm) and coir fibers by treating the fiber with NaOH by fraction of 5 % are studied here....
Identification of Potential Heritage Zones in Mysore City
The conservation of Heritage Buildings and Areas are important components of heritage regulations. In order to develop heritage regulations, identification of heritage zones are vital for developing zone-specif...
Impact of Medical Mal-Practice in India
Abstract: The patients who joined in Hospitals or approaches medical professionals for treatment are faced with many problems and the said problems are identified as many as 25 in numbers as mentioned at page 3 of...
Static Sustenance of Power System Stability Using FLC Based UPFC in SMIB Power System
The unified power flow controller is the most versatile and complex power electronic equipment that has emerged as the indispensable equipment used to control the power flow ,to boost the transmission capacity and...