Energetic Influence of Motor Power in Drive Systems with Space-Vector Static Converters and Induction Motors
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2015, Vol 39, Issue 39
Abstract
The static converters are a vital component of modern drive systems, which in turn are indispensable in industrial equipment designed for small or large complexity, because the achievement of finished goods implies the adjustable mechanical energy available at the output of the system. The aim of this paper is the energetic analysis of two drive systems with the same static converter feeding two different motors which had been performed on an experimental stand for different static operating points. It was considered feeding the both asynchronous motors from the static converter using the space vector modulation command strategy while the mechanical load was assured by a special braking machine and by a DC motor, respectively. It had been taken into consideration feeding the both motors at the same frequencies and with the same RMS voltages. The frequencies considered for the energetic analysis are 20Hz, 30Hz, 40Hz and 50Hz, the mechanical load being adjusted from no load operation up to the nominal value. The power grid energetic parameters were recorded using a Fluke 41b harmonic analyzer, while the current and voltage waveforms at the motor input, were recorded using a Metrix Ox704 digital oscilloscope and later used in Matlab to calculate the AC electric powers.
Authors and Affiliations
Mihaita Linca, Constantin Vlad Suru, Alexandru Bogdan Lupu
Keywords
Related Articles
- EP ID EP143616
- DOI -
- Views 125
- Downloads 0
FUEL PUMP WITH INJECTION PRESSURE CHAMBER FOR A JET ENGINE AFTERBURNING SYSTEM
This paper deals with a fuel pump with injection chamber, used as main fuel supplying system for an afterburning system, which can be able to serve on a jet engine (single-jet or twin-jet). The fuel system consists of: f...
The Rotary Magnetostrictive Motor: a Promising Solution for Low Power Actuators
This paper contains a theoretical and experimen-tal study on rotary magnetostrictive motor, performed with the purpose of determining the optimal conditions of opera-tion. The two main types of magnetostrictive motors kn...
An Improved Numerical Model of Heat Transfer Coefficient Corresponding to a Through Connector
This paper is a continuation of a previous research in which was presented a method to determine heat transfer coefficient values corresponding to crimped connections. Because the differences between numerical values of...
EXPERIMENTAL DETERMINATION OF PARAMETERS DESCRIPTIVE OF MAGNETO-RHEOLOGICAL VALVE
In this paper is presented an experimental test stand of rheological stop-valves. Rheological stop-valve structures are robust, simple in terms of constructive and easy to control. However, due to non-Newtonian fluid flo...
CPC−Founded Clarification of Decline of the Effectiveness of the Energy Transfer in Power Systems
The paper is focused on physical phenomena that degrade the effectiveness of the energy transfer in electrical systems when voltages and currents are nonsinusoidal and asymmetrical. The Currents’ Physical Components (CPC...