EVALUATE PERFORMANCE AND ANALYSIS CORROSION PRODUCTS FOR CARBON STEEL IN ACIDIC MEDIA
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 3
Abstract
The performance of carbon steel (C1010) has been evaluated in three acidic solutions: 1M HCL,1M H2SO4, 1M CH3COOH after immersion for 30 minutes and 300 minutes.The corrosion rate was determined by linear polarization resistance and potentiondynamic polarization techniques, and the corrosion rate in a short time of immersion was slightly higher than in a longer period of immersion due to deposits of the corrosion product on the sample surface slowing down the cathodic reaction rate and metal dissolution (anodic reaction), which can be clearly seen in PDP curves. In addition, X-ray photoelectron spectra was used to provide information on the actual compound present on the sample surface. Fe 2p, O 1s, Cl 2p, S 2p, C 1s core level spectra demonstrate that substrate termination does vary according to acidic solution type, with chloridic, sulfate, and acetate films being exhibited on top of the surfaces of samples when immersed in 1M HCl, 1M CH3COOH, and 1M H2SO4 respectively. The information provided by XPS supports and complements the data obtained from other techniques as mentioned above. All results indicate that the corrosion resistance of carbon steel in acetic acid is higher than hydrochloric acid or sulfuric acid due to the higher rate of hydrogen evolution in the latter. In other words, the worsening of surface film stability in carbon steel occurs much faster in H2SO4 than HCl or CH3COOH.
Authors and Affiliations
Mothana Ghazi Kadhim Al-Aabedy *
Keywords
Related Articles
- EP ID EP133324
- DOI 10.5281/zenodo.48355
- Views 58
- Downloads 0
EVALUATION OF INTERA CTIVE AND NON - INTERACTIVE SEGMENTA TION ALGORITHMS
This paper presents the evaluation framework for both Interactive and Non - interactive segmentation. For the evaluation of interactive segmentation, four algori thms, SRG, BPT, IGC and SIOX are considered. These a...
Evaluated the performance of Integrated PCA & DCT Based Fusion Using Consistency Verification & Non-Linear Enhancement
The image fusion is becoming one of the hottest techniques in image processing. Many image fusion methods have been developed in a number of applications. The main objective of image fusion is to combine informati...
EFFECT OF EXCITONS ON THE EXTERNAL QUANTUM EFFICIENCY OF THE INORGANIC SOLAR CELLS BASED ON SILICON
Exciton dissociation in solar cells, based on inorganic materials, is easily done under the effect of the electric field and the average temperature. Our study is oriented inorganic solar cells because of their hi...
STUDY ON HEAT TRANSFER EFFICIENCY PARAMETRES IMPROVEMENT IN SYSTEMS or UNITS
Heat exchangers are an important component in many industrial systems especially in process industries. So many commercial types of heat exchangers are available in market for exchange of heat as well as for recovery of...
QUALITY FUNCTION DEPLOYMENT IN THE DESIGN OF CUSTOM MADE FURNACES
QFD has been used effectively by various companies as a planning methodology. The main advantage of the QFD is that it shortens products development time, increase products quality, reduce cost and meet the requirements...