EXHAUST EMISSION CONTROL BY USING COPPLER PLATE AND AMMONIA SOLUTION
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 3
Abstract
As we all know the numbers of vehicles are increasing at a very fast rate therefore causing great increase in environmental pollution which needs to be controlled. For reducing this pollution government has given norms and vehicular standards. Various companies also introduce different technologies for reducing the pollutants. Similarly, the step towards for creating the eco-friendly vehicle, we have worked on new technique that can be used in automobiles. Environmental pollution control using catalytic converter is most common and effective, which is widely used in automobiles. Catalytic converter typically consists of a ceramic or metal honeycombed monolith substrate carries precious metal catalysts. As the exhaust passes over the catalyst the harmful pollutants get converted into harmless gases by promoting chemical reactions, but catalytic converter method is higher in cost and hence we have worked on optional technique. In a selective non-catalytic reduction technique we have used copper plate and ammonia solution. The experiment is carried out on four stroke single cylinder petrol engine. For the reduction measurement we have used PUC testing machine authorized by State Government. By this catalytic converter it is found that CO reduced by 63 % and HC by 50 % at ideal condition.
Authors and Affiliations
Mr. Chetan Chaudhari *
Keywords
Related Articles
- EP ID EP106856
- DOI 10.5281/zenodo.48352
- Views 54
- Downloads 0
AN EFFICIENT REVERSE CONVERTER DESIGN VIA PARALLEL PREFIX ADDER
In this paper, the implementation of residue number system reverse converters based on hybrid parallel prefix adders is analyzed. The parallel prefix adder provides high speed and reduced delay arithmetic operations bu...
DESIGN OF SEISMIC ISOLATION OF G+4 MULTI STORIED BUILDING
This paper presents the use of high damping rubber bearing system and lead plug bearing system as seismic isolation devices for the considered G + 4 multi storied building. The paper presents the provisions of AS...
xIDENTIFICATION OF ISOMORPHISM OF KINEMATIC CHAINS USING DIFFERENT KINEMATIC PAIRS
Mechanical engineering design involves intuition, experience, process analysis syntheses. In this paper, an attempt has been made to provide to identification of isomorphism among the kinematic chains using differ...
Immobilized Bioreactors for the Treatment of Industrial Wastewater – A Comparative Study
The various sources of incidence of various pollutants from major chemical process industries and their dangerous effects have been reported. The various characteristic composition of wastewater from different sources...
Performance Analysis of an NoC for Multiprocessor SoC
In this work focus on ‘Network on chip’ and “Multiprocessor system on chip” applications its a guaranteed supporting for network process to reducing the circuit area, lower power consumption, low cost, and increa...