FABRICATION AND CHARACTERIZATION OF FRICTION STIR WELDING USING AL 3105
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 4, Issue 9
Abstract
In this research study, the characterization of the microstructure evolution of friction stir lap welds (FSLW) of Aluminium incorporated with Titanium Carbide powder to form Aluminium based composites is presented. The Titanium Carbide powder was infused at the weld interface to produce a composite. The FSLW were conducted on an Intelligent Stir Welding for Industry and Research (I-STIR) Process Development System (PDS). Different welding parameters were used for the welding process. Rotational speeds of 1600 rpm and 2000 rpm and transverse speeds of 100 mm/min, 200 mm/min and 300 mm/min were employed. The process parameters were carefully selected to represent a low, medium and high setting for the feed rates. The microstructural evolution of the samples were studied. Optical microscope and scanning electron microscopy (SEM) techniques were used to investigate the particle distribution of the welded samples. The results obtained revealed the influence of the welding parameters on the particle distribution of the welded samples. A homogenous mixture of the materials was observed at higher rotational speed of 2000 rpm.
Authors and Affiliations
Smriti Verma
Keywords
Related Articles
- EP ID EP117202
- DOI -
- Views 76
- Downloads 0
DESIGN OPTIMIZATION OF A KEVLAR 29 SINGLE DISK FRICTION CLUTCH PLATE BASED ON STATIC ANALYSIS USING ANSYS
A clutch plate is a significant component used in all motor vehicles nowadays, which is used to transmit power produced by the engine to the gear box. A pressure plate which is used for engaging and disengaging th...
PARAMETRIC STUDY OF TRIBOLOGICAL PROPERTIES OF CLUTCH MATERIALS
The science and technology of Interacting surfaces in relative motion & of associated subjects and practice is called Tribology. With the advancement of engineering applications, it’s important to understand the pro...
ENHANCED METHODOLOGY TO IMPROVE INFORMATION SECURITY SYSTEM USING THE COMBINATION OF ETHICAL HACKING AND CAPTCHA TECHNOLOGY
Information Technology has become an integrated and fundamental part of the business, and with the increased automation of business processes in all the industries and sectors, the Information Technology users are not li...
Comparative Study for Lipase Production by Using Pseudomonas Aeruginosa and Pseudomonas Fluorescens
Lipases occur widely in nature, but only microbial lipases are commercially significant. The present work focuses on screening and production of extracellular laccases by Pseudomonas aeruginosa and Pseudomonas flu...
Studies on Tool Wear, Cutting Forces and Chip Morphology During High-Speed Milling of Al-Si-Mg- Fe Alloys
This paper investigates the High speed end milling of Al-Si-Mg-Fe alloy for aerospace and automotive industry. High speed machining has received important interest because it leads to an increase of productivity and a...