Fatigue Analysis of Deep Groove Ball Bearing Based on ANSYS: A Review
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 7
Abstract
Ball bearing is the rotating assembly constitute with the four main components as bearing outer, bearing inner, bearing ball and bearing cage. This research study has been carried out for the steady analysis of deep groove ball bearing using ANSYS & analytical method is investigated. In this analysis the factors consider Fatigue life, hertzian stress, strain penetration. Through contact analysis, the changes could be showed in stress, strain, penetration, sliding distance, friction stress among the inner ring, outer ring, rolling elements and cage. Furthermore, the simulation results revealed that the computational values were consistent with theoretical values. The all showed that the model and boundary conditions were correct and rational, and it would provide a scientific basis for optimum design of rolling bearings under complicated loads
Authors and Affiliations
Arvind Singh
Keywords
Related Articles
- EP ID EP143072
- DOI -
- Views 58
- Downloads 0
REMOTE SENSING INDICES FOR CROP WATER MANAGEMENT
Remote sensing has become a very powerful tool for crop condition assessment and management. The objective of this study was to understand the effectiveness of basal crop coefficient (Kcb) values estimated from re...
WEIGHT LOSS CORROSION STUDIES OF ALUMINIUM-7075 ALLOY REINFORCED WITH SILICON CARBIDE PARTICULATES COMPOSITES IN ACID CHLORIDE MEDIUM
The aim of the research work to investigate the corrosion behaviour of Silicon Carbide(SiC) reinforced aluminium 7075 metalmatrix composites (MMCs) in acid chloride solution using weight loss method. The composite...
AN INVESTIGATION ON STRENGTH CHARACTERISTIC OF CONCRETE CONTAINING RECYCLED AGGREGATES OF MARBLE WASTE
The results obtained from the present investigation on strength characteristics of concrete containing natural aggregates and natural aggregates with partial replacement by marble waste aggregates in different per...
CAD SIMULATION & FEM ANALYSIS OF AIRCRAFT LANDING GEAR MECHANISM
Aircraft landing gear supports the entire weight of an aircraft during landing and ground operations. They are attached to primary structural members of the aircraft. The type of gear depends on the aircraft desig...
IMPLEMENTATION OF ZIGBEE( 802.15.4) FOR DATA LOGGER
The aim of this dissertation is to provide data logger for remote system. It consists of a temperature sensor for constantly monitoring temperature and Zigbee module for wireless data transfer. The measured temperatu...