Fatigue strength of SS400 steel under non-proportional loading
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 38
Abstract
This study discusses fatigue properties of low carbon steel, type SS400 steel, under non-proportional loading. Multiaxial fatigue tests under proportional and non-proportional loading conditions with various stress amplitudes were carried out using a hollow cylinder specimen at room temperature. In the test, three types of stress paths were employed. They are a push-pull, a reversed torsion and a circle loading. The circle loading is a cyclic loading combined the push-pull and the reversed torsion loading in which axial and shear stress waveforms have 90 degrees phase differences. From the obtained test results, poor evaluations of failure life under non-proportional loading are indicated when the life is correlated by the equivalent strain range based on von Mises Δεeq and the non-proportional strain range ΔεNP. A modified strain parameter is presented which can evaluate the failure life in high and low strain levels under non-proportional loading
Authors and Affiliations
T. Morishita
Keywords
Related Articles
- EP ID EP118215
- DOI 10.3221/IGF-ESIS.38.39
- Views 65
- Downloads 0
Integrated structure for a resonant micro-gyroscope andaccelerometer
This paper presents the study of the mechanical behavior of a microstructure designed to detectacceleration and angular velocity simultaneously. The new resonant micro-sensor proposed, fabricated by theThELMA© surf...
Fatigue crack propagation in short-fiber reinforced plastics
The influence of fiber orientation on the crack propagation behavior was studied with single edgenotched specimens which were cut from an injection-molded plate of short-fiber reinforced plastics of polyp...
Deformation and fatigue behaviors of carburized automotive gear steel and predictions
The fatigue behavior of carburized components such as automotive transmission gears is very complex due to hardness and microstructure difference, residual stresses and multi-axial stress states developed bet...
Numerical simulation of dissimilar metal welding and its verification for determination of residual stresses
This paper summarizes the results of the through-thickness residual stress distributions on dissimilar metal weld (DMW) mock-up. DMWs, as welded joints between ferritic steels and either austenitic stainless stee...
Fracture mechanics analyses of the slip-side joggle regions of wing-leading-edge panels
The Space Shuttle wing-leading edge consists of panels that are made of reinforced carbon-carbon. Coating spallation was observed near the slip-side region of the panels that experience extreme heating. To understand t...