Friction Stir Welding Processes: A Review
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 10
Abstract
Friction Stir Welding is a novel green solid state joining process particularly used to join high strength aerospace aluminum alloys which are otherwise difficult to weld by conventional fusion welding. Unlike other solid state joining technique, in Friction stir welding a third body contact by tool will generate the additional interface surfaces and finally all the surfaces are coalesced with each other by applied pressure and temperature and form solid state weld. This review paper addresses the overview of Friction stir welding which includes the basic concept of the process, microstructure formation, influencing process parameters, typical defects in FSW process and some recent applications. The paper will also discuss some of the process variants of FSW such as Friction Stir Processing, Friction Welding processes
Authors and Affiliations
Naveen Kumar
Keywords
Related Articles
- EP ID EP89712
- DOI -
- Views 96
- Downloads 0
DESIGN AND IMPLEMENTATION OF FINGERPRINT ASSIST VENDING MACHINE USING MICROCONTROLLER
In this paper we propose an implementation technique vending machine for customer using fingerprint-based authentication. We implement the proposed design based on Advance Virtual RISC microcontroller. The circuit...
A DRILLABILITY AND GEOMECHANICAL WELBORE STABILITY ANALYSIS FOR OPTIMAL BIT SELECTION - CASE STUDY OF A FIELD IN NIGER DELTA
This paper establishs the importance of hard streak in bit selection. The hard streak is associated with siliceousferruginous sandstone with traces of siltstone rapped in augen of shale. Hitherto the drilling indu...
PROPERTIES ANALYSIS OF WASTE PLASTIC OIL AND SIZE MEASUREMENT OF NANO PARTICLE (ALUMINIUM OXIDE)
Environment concerns and depletion of petroleum fuels have created a need for the search fuels for internal combustion engines. Transformation of waste to energy is one of the recent trends in minimizing not only...
PLC-BASED SCHOOL AUTOMATION SYSTEM
In our day to day in school we observe that in school too much human effort is required to open and close the gate of school, ring the bell after every 1 hour,and tube lights and fans in the class are on even if there i...
EFFECT OF WELDING SPEED ON DEPTH OF PENETRATION, HARDNESS OF HAZ AND LONGITUDINAL DISTORTION OF V-GROOVE BUTT WELD JOINT USING TIG
In this paper study of welding speed and geometry to find out tensile and impact strength in case of butt weld joint will be done. For V-groove geometry different models of plate with various included angles from...