Hygrothermal Degradation Studies on E-Glass Woven Rovings-Epoxy Composite
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 8
Abstract
In the present work, the property degradation of the selected material (i.e. E-glass & epoxy resin composite) manufactured by compression molding was investigated as a function of temperature after direct wetting in saline medium for varying periods. For the preparation of composite specimen, ARADUR HY951 used as hardener with ARALDITE LY556. From the experiment, moisture gain trends for different temperatures which vary with time. In that, hot setting laminate having good strength when compared to cold setting laminate. It is hoped that generation of such data will help in determining the active service life of products, beyond which, they need to be discarded to prevent catastrophic failures.
Authors and Affiliations
Guduru Mahendra1
Keywords
Related Articles
- EP ID EP153427
- DOI -
- Views 47
- Downloads 0
Wear Debris Analysis of Internal Combustion Engine by Ferrography Technique
IC engines are typically used for the auto vehicles. These engines are necessary for the auto as just like the heart for soul. Because the heart of soul is fail whole system of body additionally fail. Same issue i...
Dynamic Behaviour of DFIG Driven by Wind Turbine
The global electrical energy consumption is rising and there is steady increase of the demand on power generation. So in addition to conventional power generation units a large no. of renewable energy uni integra...
MANUFACTURING OF ENVIRONMENTAL FRIENDLY PAPER FROM DOMESTIC RESIDUALS OF FRUITS AND VEGETABLES
Paper has been a very important part of a human life. It is the most versatile material with diverse uses like writing, printing, packaging, and cleaning. Traditionally, paper was produced by beating cellulose fibr...
Stiffness Analysis of Actuator Flexure by FEM
Actuator is a fluid control component, which will be used in any of the fluid control requirements. The proposed actuator is normally closed and electro-mechanically actuated with armature configuration. The armat...
SYNTHESIS AND CHARACTERIZATION OF NANO HYDROXYAPATIE WITH POM AND PVP NANOCOMPOSITE USING FOR BONE TISSUE ENGINEERING
n recent years, several kinds of polymer – hydroxyapatite nano composites have been developed as bone substitute materials. The purpose of making such composites is to reinforce the polymer and improve the bone bo...