Implementation of Hamming code using VLSI
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 2
Abstract
This paper tries to explain the implementation of hamming code using VLSI. In the present world the field of communication has got many applications, and in every field the data is encoded at the transmitter and transferred on a communication channel and received at the receiver after it is decoded. During the transmission of data it might get corrupted because of some noise on the channel. So it is necessary for the receiver to have some function which can detect the error in the received data. Hamming code is one of such forward error correcting code which has got many applications. In this paper the algorithm for hamming code is discussed and then implementation of it in verilog is done to get the results. Hamming code is an improvement over parity check method. Here a code is implemented in verilog in which 4-bit of information data is transmitted with 3-redundancy bits. In order to find the value of these redundancy bits a code is written in verilog which will be simulated in Xillinx 9.1 software. The result of simulation and test bench waveforms are also shown
Authors and Affiliations
Nutan Shep1 , Mrs. P. H. Bhagat2
Keywords
Related Articles
- EP ID EP109326
- DOI -
- Views 94
- Downloads 0
Sensor Based Assistance System for Visually Impaired
This paper is focussed to develop an electronic navigation system for visually impaired, that makes use of sensors for obstacle detection. People who are visually impaired struggle every day in performing actions that ca...
Automatic Broken Track Detection Using LED-LDR Assembly
—In India rail transport occupies a prominent position in providing the necessary transport infrastructure to sustain needs of a rapidly growing economy. Today,India possesses the fourth largest railway network in...
A Real Time Implementation of Serial Communication between Graphical User Interface and Simulator Board Using RS-232
Virtex Series FPGA are used for establishing communication to the other sub units of an system. In order to establish the link, RS232 is used. The objective of this work is to establish link between simulator board...
A comparative Study of Basalt and Polypropylene Fibers Reinforced Concrete on Compressive and Tensile Behavior
Concrete made with Portland cement has certain characteristics: it is relatively strong in• compression but weak in tension and tends to be brittle. These two weaknesses have limited its use. Another fundamental weakness...
A new method for generating key for cryptography using Deterministic random number generator
Now a day’s communication has played a key role in each and every aspect of life. In communication the main problem is security and privacy of sensitive data. The data should be transmitted from sender to receiver...