Influence of Pressure Angle in Spur Gear Vibration
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 2
Abstract
Spur Gear vibration is one of the major indispensable parameter in Maintenance division of an operating plant. Many methods have been adopted to control the vibration in gears. An approach of understanding the influence of pressure angle in spur gear vibration is required in the modern trends. Pressure angle influence in root stress has been analyzed earlier by some of the researchers, but may not be in vibration. Three steel spur gears having the pressure angle of 14½0, 200 and 250 with the same face width, pitch circle diameter and number of teeth are selected for this analysis. The gears are loaded with a torque of 6.25, 12.5, 18.75, 25, 38 and 50Nm respectively. Loads are given as a transmitted and radial force on the gear tooth. A frequency response analysis has been done on the above gear using FEA Software. The result shows that gear having 200 pressure angle is more effective in controlling the vibration than the other two pressure angles. Also gear having 250 is also being effective in controlling the vibration than the gear having 14½0. From this interpretation, it is concluded that even a small manufacturing error which leads to pressure angle variation influences more in gear vibration.
Authors and Affiliations
Rameshbabu Subramanian
Keywords
Related Articles
- EP ID EP122531
- DOI -
- Views 74
- Downloads 0
Comparative Study: Performance of SCTP with Competing Flows of the TCP over a Wired Network
The Stream Control Transmission Protocol has many features such as multi-streaming and multi-homing, and based on these features that enable to deal with multimedia applications. Therefore, it has become possible...
OPTIMIZATION OF EDM PARAMETERS USING TAGUCHI METHOD AND GREY RELATIONAL ANALYSIS FOR AISI 01 DIE STEEL
Optimization is the best method used in industrial area for increasing quality of product by lowering the cost of product. In this paper, the experimental investigation of material removal rate, electrode wear rate, s...
Software Metrics Evaluation Using Various Lines Of Code And Function Point
This paper describes the major characteristics of software engineering such as Maintainability, Reliability, Complexity, Understandability, Reusability and Testability. These characteristics measure by some software me...
DESIGN AND IMPLEMENTATION OF FINGERPRINT ASSIST VENDING MACHINE USING MICROCONTROLLER
In this paper we propose an implementation technique vending machine for customer using fingerprint-based authentication. We implement the proposed design based on Advance Virtual RISC microcontroller. The circuit...
FINITE ELEMENT ANALYSIS OF STACKED VESSELS
The stacked vessels will experience seismic conditions for San Francisco California. These conditions will be analyzed using finite element analysis and the UB-97 code. ASME section IID allowed stresses will be us...