Measurement and analysis of fatigue crack deformation on the macro- and micro-scale
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 33
Abstract
The paper describes an experiment which performs in-situ loading of a small compact tension specimen in a scanning electron microscope. Images are collected throughout a number of successive loadincg cycles. These are then analysed using digital image correlation (DIC) in order to produce crack flank displacements as a function of load. This data is then compared with a simple elastic approach, and it is concluded that elastic-plastic analysis is required in order to accurately capture the displacements close to the crack tip. A simple approach due to Pommier and Hamam is therefore employed. This gives a better representation of the data, but predicts a variation of crack tip displacement, , which is difficult to explain from a physical perspective. The need for a more sophisticated analysis of the data is therefore highlighted.
Authors and Affiliations
D. Nowell, S. O'Connor, K. Dragnevski
Improvement of performance of ultra-high performance concrete based composite material added with nano materials
Ultra-high performance concrete (UHPC), a kind of composite material characterized by ultra high strength, high toughness and high durability. It has a wide application prospect in engineering practice. But t...
Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling
This paper is devoted to the analysis of the load path effect on I+II+III mixed mode fatigue crack propagation in a 316L stainless steel. Experiments were conducted in mode I+II and in mode I+II+III. The same max...
Electrical resistivity and ultrasonic measurements during sequential fracture test of cementitious composite
Cracks in cover of reinforced and pre-stressed concrete structures significantly influence the ingress of deleterious species causing decrease in durability of these structures. The paper is focused on the effect...
Numerical modelling of reinforced concrete beams with fracture-plastic material
This paper describes the use of models of fracture-plastic materials for reinforced concrete in numerical modelling of beams made from reinforced concrete. The purpose of the paper is to use of a model of concret...
Surface crack growth in cylindrical hollow specimen subject to tension and torsion
The subject for studies is an aluminium cylindrical hollow specimen with external axial and part circumferential semi-elliptical surface crack undergoing fatigue loads. Both the optical microscope measurements an...