Mechanical Properties of Friction Stir Welded Aluminium 6082 to Copper
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 10
Abstract
The aim of present study was to analyze the influence of the microstructures and mechanical properties of friction stir welded joint of 6082 aluminium alloy and copper plates in 3 mm thickness with using filler materials. With this aim, welds were produced using High molybdenum high speed steel, with a cylindrical pin tool having 3 mm and 14 mm diameter of pin and shoulder respectively. The microstructures of weld were studied by optical microscopy and grain size in TMAZ, HAZ and NZ were analyzed. Vicker’s microhardness tests were done in transverse direction of weld to check the hardness distribution in HAZ, TMAZ and weld nugget. Transverse tensile test were performed to evaluate the weakest portion of weld joints.
Authors and Affiliations
Dhaval S. Chaudhari
Keywords
Related Articles
- EP ID EP143021
- DOI -
- Views 64
- Downloads 0
ASSESSEMENT OF QUALITY PROBLEMS FOR HIGH RISE UILDING-CASE STUDY
Quality is one of the critical factors in the success of construction projects. Quality of construction projects, as well as project success, can be regarded as the fulfilment of expectations (i.e. the satisfaction...
Design and Modal Analysis of Spur Gear with Experimental Verification
Present paper covers the design,modal analysis and results of experimental tests of spur gear.Effort is to increase the fundamental frequencies of existing gear and to improve performance of existing gear without...
EVALUATION OF RELIABILITY FOR COMPONENT BASED SOFTWARE SYSTEM
In this paper we present a reliability simulation in component based applications. In component - Based Software Engineering we can treat a software system as a combination of interdependent components. The Compo...
Simple and Cost Effective Environment Monitoring System
Monitoring Environmental factors such as temperature measurement, light intensity, relative humidity and air composition are not only important for industrial purposes but also a cause of growing concern in our da...
Finite Element Method Based Analysis into Rotary Forging of AXI-Symmetric Aluminium Disc
The present economic situation in the world has been driving the forging industry even at more competitive environment. Finite element simulation became an important tool in the forging industries because of avail...