Multi-purpose fatigue sensor. Part 1. Uniaxial and multiaxial fatigue
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 38
Abstract
The paper describes the key principles and results of preliminary experiments aimed at the development of new technique for the fatigue life prediction under conditions of biaxial cyclic tension. The foundations of the method were developed early by the numerous tests with monitoring the process of surface deformation relief formation, which is proved to be an indicator of accumulated fatigue damage under uniaxial fatigue. The employed phenomenon was early applied for the development of a family of uniaxial loading fatigue sensors. The formation of strain induced relief has been recently taken into consideration as a part of damage accumulation criteria under biaxial fatigue as well. The home-made testing machine has been designed to implement combined bending and torsion loading that simulates loads experienced by an aircraft wing skin. The experimental evidences on formation and evolution of the deformation relief revealed under conditions of combined loading, supports the proposed concept of biaxial fatigue sensor
Authors and Affiliations
M. Karuskevich, S. Ignatovich, T. Maslak , A. Menou , P. Maruschak , F. Berto
Keywords
Related Articles
- EP ID EP107296
- DOI 10.3221/IGF-ESIS.38.27
- Views 57
- Downloads 0
Quantitative estimating size of deep defects in multi-layered structures from eddy current NDT signals using improved ant colony algorithm
Detection and quantitative estimation of deep defects in multi-layered structures is an essential task in a range of technological applications, such as maintaining the integrity of structures, enhancing the safety...
Delamination of carbon-fiber strengthening layer from concrete beam during deformation (infrared thermography)
Technology of strengthening reinforced concrete structures with composite materials has found wide application. The effectiveness of strengthening of concrete structures with externally bonded reinforcement is supp...
Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole
In order to study the growth mechanism of fatigue cracks in ultrafine grained copper, stresscontrolled fatigue tests of round-bar specimens with a small blind hole as a crack starter were conducted. The hole was...
A coupled interface-body nonlocal damage model for the analysis of FRP strengthening detachment from cohesive material
In the present work, a new model of the FRP-concrete or masonry interface, which accounts for the coupling occurring between the degradation of the cohesive material and the FRP detachment, is presented; in particular, a...
Thermal stress analysis of different full and ventilated disc brakes
During the braking phase, the heat produced by friction between pads and disc cannot be entirely dissipated. Consequently, the brake disc, especially if very hard braking occur, can accumulate large amounts of&nbs...