On monitoring of mechanical characteristics of hot rolled S355J2 steel
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
Hot rolling normalization technology for producing sheets from a low-carbon steel, Steel S355J2, used in the Bulgarian Metallurgical Plant “STOMANA Industry SA” is under investigation. A newly introduced automatic application optimization procedure in this technology is an important step that leads to avoiding of traditional heat treatment, improving of steel mechanical characteristics, increasing of production efficiency, all resulting in high quality final products. On the basis of the final mechanical rolled-sheet characteristics - yield strengths, Re, ultimate tensile strengths, Rm, absorbed energies in impact tests, K, and elongations after fracture - some energy-stress and energy-stress-elongation constructions-spaces have been plotted. These spaces can be used for general evaluation of the applied rolling technology and for prediction of steel-sheet mechanical behaviour.
Authors and Affiliations
D. Angelova, R. Yordanova, A. Georgiev, S. Yankova
Keywords
Related Articles
- EP ID EP118002
- DOI 10.3221/IGF-ESIS.37.35
- Views 52
- Downloads 0
Effect of centrifugal load on crack path in thin-rimmed and webbed gears
Thin rimmed and webbed gears are used in particular applications to reduce systems weight. This kind of gears need an accurate and fail safe design. As a matter of fact, a possible failure, due to bending fatigue,...
Experimental evaluation of plasticity-induced crack shielding from crack tip displacements fields
In this work it is proposed a methodology for the evaluation of plasticity-induced crack shielding from the analysis of the crack tip displacements fields measured by digital image correlation. This methodology i...
Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole
In order to study the growth mechanism of fatigue cracks in ultrafine grained copper, stresscontrolled fatigue tests of round-bar specimens with a small blind hole as a crack starter were conducted. The hole was...
Effect of the model’s geometry in fretting fatigue life prediction
This paper analyses the influence that the type of geometry used to obtain the stress/strain fields in a cylindrical contact has on fretting fatigue life predictions. In addition, this work considers the effect th...
Analysis of the influence of the anisotropy induced by cold rolling on duplex and super-austenitic stainless steels
This report contains the results obtained from the mechanical characterization tests carried out on two different stainless steel (duplex 6%Ni, 22%Cr and super-austenitic 31%Ni, 28%Cr) used for the manufacturing of pipes...