Parametric Study for Wind Design of Vertical Pressure Vessel as per Indian Standard
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 4
Abstract
Like all other tall structures, determination of wind loads is important for industrial Pressure Vessel. All countries use different wind load standards. These different wind load standards are compared with each other in some studies. This paper describes a parametric study of wind load calculations on Vertical Pressure Vessel as per Indian Standard IS-875 (Part 4) (Ammendum 3rd 2006) with their latest addendums. The wind loads calculated, are applied to the design of structures to prevent failure due to wind. Calculated wind pressures as per different code on a Pressure Vessel produce actual loads on the structure. A good structural system for wind design is typically a strong, heavy system with robust connections to help resist loads as the wind blows across and over the structure. The Vertical Pressure Vessel is assumed to be made up of 3 components; First bottom dish which is supported on skirt, second intermediate Shell and Third top dish .The Vertical Pressure Vessel is 6.25 m tall and assumed which is locatedin urban terrain. The design wind speeds acting on vessel are to be calculated from corresponding codes. The wind force are calculated on each component as per Code procedure and checked for variation occurred. The factors like Basic Wind Speed, Terrain Category, Exposure Category, Damping factor are changed during calculation, the variation on wind force is plotted on graph.
Authors and Affiliations
Chetan Chavan
Keywords
Related Articles
- EP ID EP98871
- DOI -
- Views 113
- Downloads 0
Heavy Metals in Irrigated Crops along Tatsawarki River in Kano, Nigeria
Surface and ground irrigation water samples were collected from the three different farmlands along the Tatsawarki River. Control surface and ground water samples were collected from farmlands located away from awa...
Implementing Re-Active Power Compensation Technique in Long Transmission System (750 Km) By Using Shunt Facts Control Device with Mat Lab Simlink Tool
ABSTRACT: This paper attempts to implementation and simulation of the Fuzzy logic control of firing angle for SVC in order to achieve better, smooth and adaptive control of reactive power by using facts technology,...
A Review on performance of a DI Diesel Engine Fuelled with Ethanol-Diesel Emulsions
This paper explores the possibility of utilizing ethanol-diesel emulsion in different numeric values refer to the percentage of ethanol in DI Diesel engine.The main aim of the present review is to study the e...
Absorption of Nitrogen Dioxide into Sodium Carbonate Solution in Packed Column
Absorption of nitrogen dioxide (NO2) gas from (NO2/Air or NO2/N2) gas mixture into sodium carbonate (Na2CO3) alkaline solution was performed using packed column in pilot scale. The aim of the study was to improve the Abs...
Invention of the Plane Geometrical Formulae - Part II
In this paper, I have invented the formulae for finding the area of an Isosceles triangle. My finding is based on Pythagoras theorem