Peristaltic Motion with Porous Medium through Coaxial Vertical Channel: A Theoretical Study
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 1
Abstract
The present paper investigates the peristaltic motion with porous medium though coaxial vertical channel: A theoretical study. A perturbation method of solution is obtained in terms of wall slope parameter and closed form of expressions has been derived for axial velocity pressure gradient and pressure rise. The effects of various physical parameters on axial velocity pressure gradient and pressure rise have been computed numerically. It is noted axial velocity increases with increases in Porous parameter (D) for the two cases = - 0.5, = -1 and also we noted that pressure rise decreases with increase in Porous parameter (D) and phase shipt (θ). Ke
Authors and Affiliations
Dr. S. Ravi Kumar
THE NEW THEORY OF THE ONENESS OF SQUARE AND CIRCLE
Originally, Pi constant was understood as the ratio of circumference of a circle to its diameter. As the length of the circumference could not be measured due to its curvature, Exhaustion method was adopted for ma...
REDUCTION OF RESIDUAL STRESSES IN WELDED JOINTS USING MECHANICAL VIBRATIONS
In this study, Metal Arc Welding of rolled steel (JIS G3101 SS400) specimens were studied under computational conditions. The finite element methodology of residual stresses in butt welding of bi-linear plates is conduc...
ATMOSPHERIC CO2 GAS AND TEMPERATURE MEASUREMENT ROBOT
In the age of industrial revolution the atmosphere is disturbed by the human acts one of which is the global warming, a major threat of this century. Thus in order to control these adverse effects an monitoring of atmo...
IMPLEMENTATION CHALLENGES INVOLVED IN BIG DATA ANALYTICS
Big Data is probably the most talked-about topic in the IT world today. Currently, information is produced andstored at a rapidly exceeding rate. According to the current analysis, there are over 2 billion internet...
CRYSTALLINITY ANALYSIS OF COMPOSITE COATING ON Al SUBSTRATE BY ELECTROPLATING METHOD
Ni-P-TiO2 composite coatings were prepared on aluminium substrate by TiO2 sol-enhanced electroplating. A systematic crystallinity study has been conducted in order to understand the effect of heat treatment on the...