PIC CONTROLLED OBSTACLE AVOIDANCE ROBOT
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 10
Abstract
The obstacle detection is based on IR sensors, which detect the obstacle and the microcontroller acquires the data. According to the programmable logic placed in the controller, it decides where the robot should turn. It would then give input to motor driver, which would in turn direct the motors to control the movement of the robot. Apart from that we will use a 12v battery to power the robot along with microcontroller.
Authors and Affiliations
Sushrut Gandhi
Keywords
Related Articles
- EP ID EP90966
- DOI 10.5281/zenodo.159458
- Views 71
- Downloads 0
[b]EXPERIMENTAL ANALYSIS OF FLEXURAL STRENGTH ON GLASS FIBER SANDWICH COMPOSITE BY VARYING Z-PINS PITCHES[/b]
This paper ambit to evaluate the flexural strength of glass fiber sandwich panels with varying z-pins pitches. Failure of sandwich panel are delamination and core shear, to minimize the crack propagation, pins are...
EFFECT OF RUSHING ATTACK IN MZRP AND MULTICAST COMMUNICATION IN MOBILE AD HOC NETWORK
MANET is a self organizing system of mobile nodes that exchange information through wireless network with no fixed infrastructure. Multicast is communication between a single sender and multiple receivers on a network...
DETECTION OF COMPUTER VIRUSES USING WELM_ FPSO_FMA
Computer viruses are big threat for our society .The expansion of various new viruses of varying forms make the prevention quite tuff. Here we proposed WELM_ FPSO_FMA to detect computer viruses. The proposed metho...
An Adaptive Leaky-Bucket Mechanism for Traffic Management in OBS Networks
In Optical Burst Switched networks, each light path carry huge amount of traffic, path failures may damage the user application. Hence fault-tolerance becomes an important issue on these networks. Blocking probabi...
COMPARATIVE ANALYSIS OF PRINT GLOSS OF METALIZED SHEETS PRINTED WITH SHEET FED OFFSET PRINTING PROCESS AND DRY TONER BASED DIGITAL PRINTING PROCESS
Printing metalized sheets with offset printing process requires it to be primer coated prior to the printing. This is complex, time consuming and incorporates some additional cost. Thus, it has not been known in view of...