Process Parametric Optimization of CNC Vertical Milling Machine Using ANOVA Method in Mild Steel – A Review
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 7
Abstract
In this paper we are approaching to the effective approach for the optimization of milling machine using MINITAB 17 and Taguchi Technique in varying condition. The information about machining of difficult cutting materials is inadequate and complicated. Therefore an experimental study has to be conducted to come out with an optimum outcome. In this study, the machining parameters namely Depth of Cut, Cutting Speed, Feed Rate and Tool Diameter are optimized with multiple performance characteristics, such as maximum material removal rate and maximum surface finish. Moreover we have to demonstrate a systematic procedure of using Taguchi Parameter Design in process control of individual milling machine and to identify the optimum Material Removal Rate and Surface Roughness performance with particular combination of cutting parameters in an end milling process.
Authors and Affiliations
Shahzad Ahmad
Keywords
Related Articles
- EP ID EP89757
- DOI -
- Views 76
- Downloads 0
A SECURITY OF CLOUD DATA IN FULLY HOMOMORPHIC ENCRYPTION
The advancement in technology, industry, e-commerce and research. A large amount of complex and pervasive digital data is being generated which is increasing at an exponential rate and often termed as Big data. Fo...
[b]Secure Symmetric Key Algorithm [SSKA] For Information Exchange Using Modulo 67 [/b]
The e-data usage is increasing day by day. Nowadays exchange of data over the internet is increased higher than before. Security is the main issue in communication over a network. Protection must be given against...
Optimisation And Method
One of the most critical factors in developing pharmaceutical drug substances and analytical test methods used to analyze pharmaceutical products should generate valid and meaningful data in terms of reliability, accur...
Membrane Fouling Control by Ultrasonic Membrane Anaerobic System (UMAS) to Produce Methane Gas
In Malaysia, more than 30 tonnes of waste sugarcane was burned and damped to an open field. The direct discharge of sugarcane wastewater causes serious environmental pollution due to its high chemical oxygen deman...
Design of Fir Filter Using Area and Power Efficient Truncated Multiplier
This paper describes the design of Finite Impulse Response (FIR) using the rounded truncated multiplier which offers diminution in area, delay, and power. This anticipated method finally reduces the number of full...