Real Time Based Driver's Safeguard System by Analyzing Human Physiological Signals
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 1
Abstract
In this paper a new approach based on bio-signal sensing was used for real time accident avoidance. A wireless embedded system with real time bio-signal processing techniquewas proposed. The bio-signals sensor module consists of ECG, EEG, EOG and alcohol sensor. These bio-signals were first acquired by the sensor module .Then the signal is processed and scheduled in the processor with the help of the RTOS installed in it. The processed signal is transmitted to the receiving section by using the wireless data communication. The receiver unit can read the sensor data from wireless receiver module using zig-bee protocol. This received real time sensor data is compared with the pre-determined data stored in the processor memory and the decision was taken. This can provide warning to the driver by giving alarm and also having vehicle engine ignition control for stopping the vehicle. The parking light must be turned on before the engine stops so that the driver’s coming behind can control the vehicle and thereby accident can be avoided.
Authors and Affiliations
Nithin. K. Kurian1 and D. Rishikesh2
Keywords
Related Articles
- EP ID EP98559
- DOI -
- Views 97
- Downloads 0
Analytical Performance of LDPC Codes with OC in the Presence of Interferers
Optimum Combining (OC) with Low Density Parity-check (LDPC) code improves the performance of overall system (LDPC-OC) by providing additional coding gain. Using Gaussian approximation (GA) approach the bit error rate of...
Mitigating ROQ Attacks using Flow Monitoring Method
Reduction of Quality attacks is a milder form of the DOS attacks but these are more difficult to detect than the traditional flooding attacks. The goal of these attacks do-not wish to completely cut-off services an...
Comparitive Study Of Diffrent Multiplier Architectures
This paper presents a comparative analysis of three different multiplier architectures. The three multipliers architecture are array multiplier, a column bypass multiplier, and a array multiplier using Reversal Log...
Static Analysis Of Tractor Trolley Axle
This paper deals with static analysis of tractor trolley axle. In India tractor trolley (or) trailers are very popular and cheaper mode for transport of goods and in rural as well as urban areas. Especially various...
Observer Based Feedback Linearization Control of an Under-actuated Biped Robot
This paper deals with the design of a control strategy that combines a nonlinear observer and a partial feedback linearization controller to stabilize the periodic orbits of an under-actuated three link biped robot...