ROLE OF PHOTOSENSITIZER (ORANGE-G) IN PHOTOGALVANIC CELL FOR GENERATION OF SOLAR ENERGY
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 2015, Vol 4, Issue 2
Abstract
The Orange-G is used as photo sensitizer with EDTA as reductant for the enhancement of the conversion efficiency and storage capacity of photo galvanic cell for its commercial viability. The observed value of the photo generation of photo potential was 932.0mV and photocurrent was 265.0 µA. The observed power at power point was 156.40 mW and the conversion efficiency was 1.50 %. The fill factor 0.5035 was observed experimentally observed at the power of the cell. The photo galvanic cell that developed can work for 140 min in dark. The storage capacity of the cell is 60.8%. The effect of different parameters on electrical output of the cell was observed. A mechanism has also been proposed for the generation of the photocurrent and photo potential in photo galvanic cell.
Authors and Affiliations
Shribai Meena, Shiv Saini, Dr. R. C. Meena
Keywords
Related Articles
- EP ID EP111234
- DOI -
- Views 58
- Downloads 0
Thermodynamic Characterization of Sorption of Copper(II) ions on Rice Husk
This paper attempts to develop simple and easily understandable thermodynamic parameters related sorption process at the equilibrium. Batch kinetic studies were conducted for the adsorption of Cu(II) on SCRH (sod...
IMPLEMENTATION OF HEALTH MONITORING SYSTEM USING INTERNET OF THINGS
Health is one of the most important aspects of human life. Advancements in technology has paved ways for various techniques in health monitoring. Health Monitoring refers to continuous examination of the person’s...
Reparametrization of Interval Bézier Curve on Rectangular and Circular Domain
Interval Bezier curve are new representation forms of parametric curves that can embody a complete description of coefficient errors. Using this new representation, the problem of lack of robustness in all state-of-the...
NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING
The purpose of the present project work was to understand the formability of AA1050-H18 alloy to fabricate truncated pyramidal cups using single point incremental forming (SPIF) process. The finite element analysis has b...
3-Bit R-2R Digital to Analog Converter Using Binary and Thermometer Code
In this paper analysis of 3-bit R-2r ladder DAC designed with the specification of INL &DNL .The simulation & analysis is done using the binary and thermometer code. In this design DAC the Maximum INL &...