SHEAR STRENGTH PERFORMANCE ANALYSIS OF HYBRID JOINTS (ADHESIVE AND RIVET) – SINGLE LAP JOINTS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 5, Issue 2
Abstract
Adhesive bonded are already playing a significant role in the development and production of metal aircraft structures and indication are strong that such joints will be even greater importance in filamentary composite structures. The performance of a hybrid joint (adhesive and rivet) depends on many parameters and its design becomes complex when the design aims to create a synergy between these two joining methods which are commonly used to composite or different (various) metal plates. The design is applied to analyze the parameters that influence the load transfer between the different components of the joints as well as the maximum stress in adhesive. A first decomposition of the joint into functional requirements and design parameters leads to a coupled design. A decoupled design is obtained through the recording and reformation of both functional requirements and design parameters. The design matrix is then used to propose a new design through physical integration of the design parameters. Comparison between the new design and baseline geometry shows a reduction in the maximal stress concentration inside the joint. This improvement should result in higher load transfer capability while maintain similar dimensions. In various applications and also for joining various composite parts together, they are fastened together using adhesives or Mechanical fasteners or rivets.
Authors and Affiliations
S. B. Bawaskar
Keywords
Related Articles
- EP ID EP117653
- DOI -
- Views 62
- Downloads 0
HARVESTING OF WATER FROM AIR USING HELICAL COIL
Water scarcity has become a worldwide issue in the current era, this issue is more complicated in the arid areas, where it rains rarely and there is hardly any freshwater source at all. Hence, there is a serious n...
Synthesis, Testing of Polymer Carbon Nanocomposite and Structural Analysis of Tennis Racket Frame
The tennis racket frame design had lot of improvements in the past few years. The racket heads have grown larger, on frames that have become lighter. The tennis racket frame and strings are of great importance for the p...
Design and Analysis of a D2D based System for Contents Transfer
Content transfer amount, which is based on mobile communication networks in the development of applications for many applications and the dissemination of rapid smart devices, has increased. However, as mobile da...
CIRCULAR SRR LOADED UWB ANTENNA WITH WiMAX BAND NOTCH
Now a day’s UWB antenna design is one of the challenging areas. This paper proposes a simple method for filtering out 3.5GHz WiMAX band which is an already allocated band in UWB spectrum. Single circular Split Rin...
Multivariate Optimization of Conventional Spinning Process Parameters
Metal spinning is a forming process that allows production of hollow, axially symmetric sheet metal components. One of the main problems of the metal spun parts production is the design of the process plan in order to a...