Spherical particles formation under biaxial cyclic loading due to mesotunneling effect
Journal Title: Frattura ed Integrità Strutturale - Year 2015, Vol 9, Issue 33
Abstract
Fatigue fracture surfaces of Al-based alloys with fatigue striations pattern and such wear debris pattern as spherical particles were investigated fractographically, on the bases of the OG’e spectroscopic analysis. The sequence of events during fatigue crack edges opening was discovered when the elliptical or spherical shapes of wear debris build up on the fracture surface in crosspieces between mesotunnels under mode III of mode I fatigue crack opening because of volume rotation. The cause of black colour of places with fretting patterns on the fracture surfaces of Al-based alloys is discussed.
Authors and Affiliations
A. Shanyavskiy
Keywords
Related Articles
- EP ID EP89591
- DOI 10.3221/IGF-ESIS.33.02
- Views 79
- Downloads 0
Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics
In the present paper, the well-known wedge splitting test (WST) is applied on specimens with different geometries (S= 150, 200, 300 mm) and variants of the specimens’ configurations. K-calibration (B1) and T-stre...
Gradient-enriched linear-elastic tip stresses to perform the highcycle fatigue assessment of notched plain concrete
Gradient Elasticity (GE) allows the stress analysis to be performed by taking into account the size of the dominant source of microstructural heterogeneity via a suitable length scale parameter. This is done by s...
Use of a gray level co-occurrence matrix to characterize duplex stainless steel phases microstructure
Duplex stainless steels are widely used in industry. This is due to their higher strength compared to austenitic steels and to their higher toughness than ferritic steels. They also have good weldability and high resista...
Analisi del cedimento strutturale del braccio di una gru portuale
A micromechanical approach for the micropolarmodeling of heterogeneous periodic media
Computational homogenization is adopted to assess the homogenized two-dimensional response ofperiodic composite materials where the typical microstructural dimension is not negligible with respect to thestructural...