Stability of Simply Supported Square Plate with Concentric Cutout
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 2
Abstract
The finite element method is used to obtain the elastic buckling loads for simply supported isotropic square plate containing circular, square and rectangular cutouts. ANSYS finite element software had been used in the study. The applied inplane loads considered are uniaxial and biaxial compressions. In all the cases the load is distributed uniformly along the plate outer edges. The effects of the size and shape of concentric cutouts with different plate thickness ratios and having all-round simply supported boundary condition on the plate buckling strength have been considered in the analysis. It is found that cutouts have considerable influence on the buckling load factor k and the effect is larger when cutout ratios greater than 0.3 and for thickness ratio greater than 0.15.
Authors and Affiliations
Jayashankarbabu B. S
Keywords
Related Articles
- EP ID EP99393
- DOI -
- Views 85
- Downloads 0
AN EFFICIENT WAY OF RETRIEVAL DATA BY TRACKING ATTACKERS
A major threat to the internet is that the Distributed Denial- of- Service (DDoS) attacks. There is no efficient way to traceback the attackers because of memoryless feature of routers. In this paper, trace back o...
Dynamic Structural Optimization with Frequency Constraints
The present work introduces a new method of structural optimization based on frequency constraints by using FEM in conjunction with Evolution optimization. First able as in any structure using this type of opti...
MIMO System Performance Evaluation for High Data Rate Wireless Networks using Space Time Block Codes with Orthogonal Structure
Space–time block coding is used for data communication in fading channels by multiple transmit antennas. Message data is encoded by applying a space–time block code and after the encoding the data is break into ‘...
Damage Tolerance Evaluation for Wing Structure with Large Cutout
Damage tolerance evaluation of a wing box with large cutout in the bottom skin is carried out in steps. Stress analysis is first carried out to identify the critical location for fatigue crack initiation. A local...
Finite Element Analysis of Single Point Cutting Tool
In this project, temperature at tool-tip interface is determined, generated in high-speed machining operations. Specifically, three different analyses are comparing to an experimental measurement of temperature...