STATIC AND DYNAMIC ANALYSIS ON TATRA CHASSIS
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2012, Vol 2, Issue 1
Abstract
This paper deals with the analysis of chassis frame for improving its payload by adding stiffner and c channel at maximum stress region of chassis frame. The FEM analysis has been carried out with various alternatives. The results illuminate the new creative ways for optimum frame design which makes it more sustainable for structural concerns. This paper analyzed the backbone frame for both dynamic and static load condition with the stress deflection bending moment on the tatra chassis frame. The finite element analysis over ansys is performed by considering the load cases and boundary conditions for the stress analysis of the chassis. The tatra chassis is being modeled in catia v5 and then it is being imported in the finite element analysis software-Ansys. At present the payload of the tatra is 10.4 tones in this project we enhance the capacity of vehicle to 14 tones from existing chassis as per the requirement. This has been carried out with limited modifications by adding stiffeners and c channel. The necessary design changes required to enhance the load carrying capacity of the vehicle has been recommended successfully.
Authors and Affiliations
Sairam Kotari , V. Gopinath
A New 5 Level Inverter for Grid Connected Application
A five-level inverter is developed and applied for injecting the real power in to the grid to reduce the switching power loss, harmonic distortion, and electromagnetic interference caused by the switching operation...
Securing Personal Information in Data Mining
This paper presents few of the frequent authentication and security mechanisms and mechanisms used in several securing personal information in data mining techniques. The paper describes an overview of some of the well k...
Anartificial Neural Network for Prediction of Seismic Behavior in RC Buildings with and Without Infill Walls
In this study the influence of masonry infill walls on the seismicbehavior of RC frames with help of ETABS software were studied.Pushover analysis on buildings with five, seven, nine and eleven storey with symmet...
The Diference of Wall Elements State Including the Frf Function
Abstract: The recommendation of Polish PN - B-03002norm shows a need of quality control of wallelements production, and classified them as elements of category I or II. This classificationis decided in institution...
An Adaptive Routing Algorithm for Communication Networks using Back Pressure Technique
The basic idea of backpressure techniques is to prioritize transmissions over links that have the highest queue differentials. Backpressure method effectively makes packets flow through the network as though pulled by...