Studies on Large Span Cantilever Structures by using Staad PRO. Analysis
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 10
Abstract
The main aim of this investigation is to study which section of the large span cantilever structures are more safe and economical among the three sections of pipe, angle and tube. This study focused on the deflections of cantilever spans under different loading conditions such as dead load, live load and wind load and their design details for different spans starting from 8 m span to 20 m span by increasing in the order of 4 m span. During the study the steel take off also varies with the variation in different materials and variation in different spans and observed that the deflections also vary with the variation of spans and elements with two side cantilever structures. On the study the inference is that by comparing the output of STAAD.Pro (structural analysis and design) analysis results of different sections and it is concluded that the steel take off for pipe section is 3% less than tube section in weight and 14% less than angle section in weight. This gives savings 9% in total weight of steel required for frame and concluded that pipe section is more economical when compared to other two sections.
Authors and Affiliations
Abhilash Pokkilan
Keywords
Related Articles
- EP ID EP127532
- DOI -
- Views 85
- Downloads 0
The EFFECT OF INFLUENTIAL PARAMETERS OF MOVING MASS ON DYNAMIC RESPONSE OF BEAM USING GREEN FUNCTION
In this paper, the dynamic behavior of the uniform simply supported Bernoulli Euler beam structures subjected to moving mass is analyzed traversing its span using Green Function approach. Green Function is easily suitabl...
HYBRID APPROACH OF BOOSTED TREE FOR CHURN PREDICTION IN MATLAB
Organization puts much attempt to hold the churn clients in the company by identifying them as clients are beneficial persons to the growth of a company. Hybrid approach of Boosted tree is one of advance algorithm...
REVIEW ON FPGA BASED VGA CONTROLLER
These days devices produced in companies must be highly robust in order to compete with the ever changing demands in products for modern day era. Field-programmable Gate arrays (FPGAs) is best suitable to achieve its b...
THE EFFECT OF HYBRIDIZATION ON MECHANICAL PROPERTIES OF PINE APPLE LEAF FIBRE (PALF) AND COIR FIBRE
The availability of Composite materials and natural Fibre is abundance and also they are very inexpensive when compared to other advanced man-made Fibre. These natural Fibre s are used as a suitable reinforcing mat...
NETWORK INTRUSION DETECTION SYSTEM IN MESH TOPOLOGY
The NIDS is a term which specify about the introduction of the malicious attacks which takes place in the networks. This paper focuses on the types of the attacks which are made on the networks and the prevention techn...