STUDIES ON THE EFFECT OF SPACING OF COIR GEOTEXTILE ON LIME STABILISED QUARRY WASTE COLUMN
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 8
Abstract
Stone columns are massively used ground improvement technique. Installation of stone columns enhances the load carrying capacity and accelerates consolidation and thereby reduces settlement. The lateral confinements offered by the surrounding soil are inadequate to form the stone column, when installed in extremely soft soils. In such cases, the performance of stone column can be improved by lateral reinforcements. Here coir is provided as the lateral reinforcement. The present study investigates the load verses settlement response of various spacings of the coir geotextile reinforced lime stabilised quarry waste column. Four different spacings are adopted. The results revealed that the load carrying capacity of stone column is influeneced by the spacing of the reinforcemnt.
Authors and Affiliations
Ancy Genu George
Keywords
Related Articles
- EP ID EP149306
- DOI 10.5281/zenodo.60807
- Views 66
- Downloads 0
INTELLIGENT LIGHTING SYSTEM WITH ENERGY EFFICIENCY
This paper describes Intelligent Lighting System to reduce energy consumption in lighting system. Now days’ saving energy is the most important issue, so many light control systems have been initiated in current market....
Comparative Analysis of Various Edge Detection Techniques for Bio Medical Images
Edges characterize boundaries and are therefore considered for prime importance in image processing. Edge detection filters out useless data, noise and frequencies while preserving the important structural propert...
Analyze the Transmissibility of Various Materials Using Vibration Analysis
Vibration is a to and fro motion of a body about its mean position. It is desirable or undesirable, it depends on our work, but necessarily produce during operation of any machine. To minimize vibration level, iso...
Performance Improvement & Weight Reduction of Mono Leaf Spring by using Composite Material
An important parameter in the design of leaf spring is the width to thickness ratio (W/T). Decrease in W/T ratio decreases the material required & consequently the weight of the leaf spring for the same vertic...
AN APPLICATION OF ASYMMETRICAL GLASS FIBRE-REINFORCED PLASTICS FOR THE MANUFACTURE OF CURVED FIBRE REINFORCED CONCRETE
There was developed a novel technological and constructive approach for the low-cost production of curved freeform formworks, which allow the production of single and double-curved fibre reinforced concrete. The s...