STUDY OF EFFECTS OF VARIOUS FILLER MATERIALS ON MECHANICAL PROPERTIES OF CARBON-EPOXY COMPOSITE
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 4, Issue 9
Abstract
This Paper complies the study of effects of various filler materials on Mechanical Properties of Carbon-Epoxy Composite. The paper gives the diversified description of the behavior of the Carbon-Epoxy Composite, under different loadings and conditions. The Carbon-Epoxy Composite was fabricated using various fillers such as, Coremat, Aerosil and Granite. The Composition of the Carbon-Epoxy Composite consists of 50% Carbon Fiber, 40% Resin and 10% fillers by weight. Three different types of Carbon-Epoxy Composite specimen were fabricated using three different Fillers, as mentioned above. The Method Adopted to fabricate the Carbon-Epoxy Composite is conventional Hand Lay-up technique. Furthermore, the Carbon-Epoxy Composite specimen was subjected to various Test Conditions, namely Tensile Test, Impact Test and Water Absorption Test and the behavior of the same is recorded and described in this paper.
Authors and Affiliations
Prof. Nikhil Anigol
Keywords
Related Articles
- EP ID EP143191
- DOI -
- Views 50
- Downloads 0
IMPROVE STEAM TURBINE EFFICIENCY BY USE OF REHEAT RANKINE CYCLE
Steam are a major energy consumer. Optimising process operating conditions can considerably improve turbine water rate, which in turn will significantly reduce energy requirement. Various operating parameters affect con...
Corrosion Behavior of Amalgam/Cockles Shells Composites in Artificial Saliva
Metal matrix composites have been prepared by adding cockles’ shells CS powder to dental amalgam with three weight percents 14.2, 28.5 and 42.8 wt% as an attempt to improve the corrosion behavior of the final prod...
Seismic Performance of RC Structure Using Different Base Isolator
Hospital buildings are of great importance after any natural calamity such as earthquake. The structural and non-structural components should remain operational and safe after earthquake. So to mitigate the effect...
Development of an Web based ERP module for an Educational Institute: A case of Training & Placement (TNP) Cell
This paper deals with the Development of an Web based Enterprise Resource planning (ERP) module for an Educational Institute: A case of Training & Placement (TNP)cell. An ERP system contains various modules in any...
NTELLIGENT OPTIMIZATION AND SCHEDULING OF NETWORKED CONTROL SYSTEMS USING NEURAL NETWORK
This paper presents the use of Neural Networks (NN) for transmission time scheduling for the Networked Control System (NCS) where a network is widely used to connect sensors and actuators to the control systems. T...