Study Of Influence Of Micro Structural Parameters On Workability And
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 2, Issue 1
Abstract
The present paper deals with the influence of percentage metakaolin (0, 10, 20 and 30 replacing cement by water-binder ratio (0.325, 0.35, 0.375 and 0.40) and the aggregate compressive strength of HPC. The experimental work is carried out in the laboratory with locally available materials. A suitable super-plasticiser SP the workability increases with increase of W/B ratio, decreases with increase of A/B ratio and is adversely affected by the content of admixture metakaolin. Compr maximum at 10% metakaolin addition and decreases with increase of A/B ratio.
QUALITY FUNCTION DEPLOYMENT IN THE DESIGN OF CUSTOM MADE FURNACES
QFD has been used effectively by various companies as a planning methodology. The main advantage of the QFD is that it shortens products development time, increase products quality, reduce cost and meet the requirements...
DESIGN AND ANYLYSIS OF VISCOUS DAMPER FOR VIBRATION REDUCTION IN HAND OPERATED POWER TOOLS
Vibration-reducing viscous damper have been used to reduce the hand-transmitted vibration exposures from machines and powered hand tools but their effectiveness remains unclear, especially for finger protection.Th...
Response Evaluation of Stairways in RC Frames Under Earthquake Ground Motions
Stairways, the primary vertical emergency exit routes in multistory buildings, are critically important for egress and access during earthquakes and fires. Seismically damaged stairways have delayed evacuation, im...
BUILDING ENERGY MANAGEMENT SYSTEM USING ISO 50001 STANDARD
Neither energy can be created nor can be destroyed, so the main purpose of Building Energy Management Systems Software is to control the energy devices to make effective utilization of energy. All efforts are bein...
EFFECT OF COOLANT JET HOLES ARRANGEMENT ON FILM COOLING PERFORMANCE
The film cooling effectiveness and local heat transfer coefficient for coolant jet holes, arrangement, orientation, and inclination angle have been investigated. The tests were carried out using a single test tran...