Sub-critical cohesive crack propagation with hydro-mechanical coupling and friction
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 35
Abstract
Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of the concrete compared to the same parameters measured during a short-time laboratory test. This phenomenon causes the so called sub-critical crack propagation. That is the reason why the International Commission of Large Dams recommends to neglect the tensile strength of the joint between the dam and the foundation, which is the weakest point of a gravity dam. In these conditions a shear displacement discontinuity starts growing in a point, called Fictitious Crack Tip (shortened FCT), which is still subjected to a compression stress. In order to manage this problem, in this paper the cohesive crack model is re-formulated with the focus on the shear stress component. In this context, the classical Newton-Raphson method fails to converge to an equilibrium state. Therefore the approach used is based on two stages: (a) a global one in which the FCT is moved ahead of one increment; (b) a local one in which the non-linear conditions occurring in the Fracture Process Zone are taken into account. This two-stage approach, which is known in the literature as a Large Time Increment method, is able to model three different mechanical regimes occurring during the crack propagation between a dam and the foundation rock.
Authors and Affiliations
S. Valente, A. Alberto, F. Barpi
Keywords
Related Articles
- EP ID EP133250
- DOI 10.3221/IGF-ESIS.35.35
- Views 54
- Downloads 0
Modelling probabilistic fatigue crack propagation rates for a mild structural steel
A class of fatigue crack growth models based on elastic–plastic stress–strain histories at the crack tip region and local strain-life damage models have been proposed in literature. The fatigue crack growth is reg...
Novel magnetic composites based on water soluble unsaturated polyester resin and iron oxide nanoparticles
Magnetic nanocomposites on the basis of water soluble unsaturated polyester resin filled with different amount of iron oxide nanoparticles have been successfully prepared. The mechanical properties of thus pr...
Fatigue life assessment of a non-load carrying fillet joint considering the effects of a cyclic plasticity and weld bead shape
Fatigue life depends strongly on irreversible contributions that accumulate during cyclic loading and unloading of structures. However, the correct identification of the loading path in terms of uniaxial or multi-...
Use of a gray level co-occurrence matrix to characterize duplex stainless steel phases microstructure
Duplex stainless steels are widely used in industry. This is due to their higher strength compared to austenitic steels and to their higher toughness than ferritic steels. They also have good weldability and high resista...
Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading
Most of the prior studies on the prediction of fatigue lives have been limited to uniaxial loading cases, whereas real world loading scenarios are often multiaxial, and the prediction of fatigue life based upon uniaxial...