The Comparison of Two Monopulse Tracking Systems: Four – Horn and Multimode (based on the simulation results of HFSS)
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 9
Abstract
The tracking system is a functional block of satellite and navigating system that detects the presence of various electromagnetic scatterers and determines their location. During the past two decades, a considerable amount of work has gone into the development of tracking schemes for the satellite communication system.Here is a review of few techniques based on the recent researches being carried out in this field. Comparison of the most widely used four – horn and multimode monopulse tracking systems are made and as a further study of the part of dissertation, appropriate simulations based on HFSS has been carried out to support the comparison made indicating the significances and insignificances.
Authors and Affiliations
Brinda M. Chotaliya#1 , SugamPolara
Keywords
Related Articles
- EP ID EP157064
- DOI -
- Views 100
- Downloads 0
K-LEACH: An improved LEACH Protocol for Lifetime Improvement in WSN
A Wireless Sensor Network is the collection of large number of sensor nodes, which are technically or economically feasible and measure the ambient condition in the environment surrounding them. The difference betw...
Comparison of Bending Stresses for Different Face Width of Helical Gear Obtained Using Matlab Simulink with AGMA and ANSYS
Helical gears are widely used in industry where the power transmission is required at heavy loads with smoother and noiseless operation. The study in this paper shows that the complex design problem of helical gear...
Privacy and Utility in Data Publishing with Full Functional Dependencies
A number of methods have recently been proposed for privacy preserving data mining of multidimensional data records. One of the methods for privacy preserving data mining is that of anonymization, in which a reco...
Performance Evaluation of Clustering Algorithms
Data mining is the process of analysing data from different viewpoints and summarizing it into useful information. Data mining tool allows users to analyse data from different dimensions or angles, categorize it, a...
Optimization of EDM Process Parameters Using Taguchi Method with Graphite Electrode
In this paper experimentation is performed on AISI D3 tool steel using graphite electrode of 10 mm diameter. The process parameters are taken on the basis of Taguchi method. The objective of the paper is to optimize the...