TO STUDY AND ANALYSIS OF A MICRO MECHANICAL MODEL OF TWO DIFFERENT HARD STEEL OF DIFFERENT COMPOSITION BY VOLUME ELEMENT METHOD
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 9
Abstract
This work presented the Micromechanical modeling of flow curve of DP800 steel in uniaxial tension was studied using the representative volume element (RVE) method. Digimat and ABAQUS software were coupled and used to provide the required RVE model parameters and to perform simulations. Modeling results were validated using the experimental flow curves of the steels. It was found that the flow curve of DP800 steel was accurately predicted from the onset of plastic deformation up to the onset of necking. The RVE size of 12.7x12.7x12.7 μm and 7.9x7.9x7.9 μm containing 26 martensite islands were found as the optimum RVE sizes for DP800 steel. A mesh of C3D4 elements having a size of 0.050 μm was found to be the optimum element type and mesh.
Authors and Affiliations
Harshita Gupta*
Keywords
Related Articles
- EP ID EP96348
- DOI 10.5281/zenodo.154561
- Views 72
- Downloads 0
A Study on Image Registration for Remote Sensing Images
Image registration is one of the challenging tasks in image processing problems. The problem of image registration is to find a geometrical transformation that aligns points in one view of an image with correspond...
Determination of Suitable Growth Medium for Chlorella Minutissima
The present investigation was undertaken to check the best suitable medium for high biomass production rate of genus Chlorella minutissima. Preliminary investigations undertaken with three widely used media i.e. C...
COORDINATED CONTROL OF PSS WITH FACTS CONTROLLERS FOR DYNAMIC PERFORMANCE ENRICHMENT
There are a unit 2 forms of oscillation damping controller in grid that area unit grid stabilizer (PSS) and versatile ac transmission systems (FACTS). Numerous works are administered on the damping of grid low...
THE INFLUENCE AND IMPACT OF DIGITAL PRINTING ON CARBON FOOT PRINT OF PRINT INDUSTRY
Sustainable print industry needs to focus on eliminating waste and reducing their carbon footprint. Print services can accommodate this by using better equipment, good planning, and advanced manufacturing and printing te...
DESIGN OF LINEAR SWITCHED RELUCTANCE MOTOR(LSRM) FOR RAILWAYS
Switched-reluctance motors have gained attention in the variable-speed drive market. The savings in manufacturing cost of the motor due to its simplicity of construction and use of minimum number of switching devi...