Neutron flux distribution in (Pb, Ta and W) target using accelerator of 18 MeV electron beam
Journal Title: Eurasian journal of physics and functional materials - Year 2018, Vol 2, Issue 2
Abstract
The production of neutrons can be carried out with the bombardment of the nuclei of heavy atoms, with accelerated and energetic particles (generally electrons). The electron collides with the target nuclei, so, 20 to 30 neutrons are produced by a process called "spallation". Several countries begin to develop neutron sources especially in the United States, Europe and Japan. The development of new measuring instruments and methods has generally increased the demand for neutron utilization in several areas, such as accelerator proton-based, where protons bombard a heavy metal target. The atoms of the target are excited, resulting in neutron emission.
Authors and Affiliations
Abdessamad Didi, Ahmed Dadouch, Otman Jai, Mohamed Bencheikh
Neutron flux distribution in (Pb, Ta and W) target using accelerator of 18 MeV electron beam
The production of neutrons can be carried out with the bombardment of the nuclei of heavy atoms, with accelerated and energetic particles (generally electrons). The electron collides with the target nuclei, so, 20 to 30...
Decreasing of the concentration quenching of fluorescent dye in a solution by introducing it to nanoparticles of silicon dioxide
The technique of introduction a fluorescent dye Tris(bipyridine)ruthenium (II) chloride into nanoparticles of silicon dioxide in isopropyl alcohol was tested. The preparation of nanoparticles was carried out by means of t...
Influence of overlapping between the fluorescence spectra of dye molecules and the spectrum of plasmon absorption of silver nanoparticles on the luminescence of laser dyes in ethyl alcohol
In the present work, the influence of the degree of overlapping between the plasmon absorption spectrum of silver nanoparticles and the luminescence spectra of P6Zh, phenalamine 160, and oxazine 17 on their luminescence w...
Development of energy-saving methods for minimization of power and load losses
The article presents information on optimization of steady-state regimes in power supply systems in order to minimize power losses. The following tasks were formulated and solved: engine parameters were determined; the s...
Neutron-removal cross sections of 6,8He, 8Li and 9,10Be nuclei
Neutron-removal cross-section ( σ−xn ) measurements of neutron-rich light nuclei were performed on the COMBAS fragment-separator with a multi-detector Si telescope at intermediate energies (22-34) MeV/nucleon. The remova...