New Look at the Process of Reclamation of Moulding Sands
Journal Title: Archiwum Odlewnictwa - Year 2012, Vol 12, Issue 3
Abstract
This paper presents a new perspective on the issue of reclamation of moulding and core sands. Taking as a premise that the reclamation process must remain on the surface of grains some not separated binding materials rests, it should be chosen the proper moulding sand’s composition that will be least harmful for the reclaim quality. There are two different moulding and core sands taken into examinations. The researches prove that a small correction of their compositions (hardener type) improves the quality of the received reclaims. Carried out in this article studies have shown that such an approach to the problem of reclamation of the moulding and core sands is needed and reasonable.
Authors and Affiliations
S. M. Dobosz, K. Major-Gabryś, M. Hosadyna
Keywords
Related Articles
- EP ID EP72683
- DOI 10.2478/v10266-012-0075-0
- Views 85
- Downloads 0
Ecological aspects of the use of lost foam patterns
The paper discusses some aspects of ecology in the use of lost foam patterns for piece production of large castings poured from ferrous alloys under the conditions of Metalodlew SA. Foundry. The technological processes u...
Physicochemical preparation of the AlSi11 alloy for castings of fire-fighting equipment
The paper presents results of reaction kinetics investigation of crystallization processes of refined, modified with Sr and Sb as well as filtered silumin destined to casting of fire-fighting equipment. It has been deter...
Influence of Addition of Briquettes with Dust Content into the Charge of Electric Induction Furnace on Cast Iron Quality
Foundry dust from blasting and grinding of castings contain a high amount of iron, ergo it is possible its recycling in foundry process. Dust was compacted by briquetting, two kinds of briquettes were prepared (A contain...
Analysis of the influence oxygen and hydrogen during melting aluminium and his alloys
In the work was stated term the analysis of ion influences in melting codnuction of aluminium and his alloys. Influence from hydrogen and oxygen, hydrogen and oxygen and steam water together was distinguished. Where have...
The analysis of carbon attendance in copper alloys as reason of gas porosity
In the work show, that opinions the leaning on it dissolubilities of carbon can be recognized (and only in approximation) only for copper about large purity. They do not concern it her mostly multiple alloys, at which th...