Non-reciprocal passive devices closely spaced ferrite inserts internal magnetic field investigation
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2010, Vol 0, Issue 40
Abstract
Determining demagnetizing factor method of two ferromagnetic disks is described. Dependence of two ferrite disks demagnetizing factor from distance between them is investigated by using ferrite disks of type 30SCH9 with diameter 32 mm and thickness 4 mm.
Authors and Affiliations
Vol. Vuntesmeri, M. Stokolos
Keywords
Related Articles
- EP ID EP309486
- DOI 10.20535/RADAP.2010.40.95-99
- Views 71
- Downloads 0
Modern devices of optimum filtration for the active radar system
The principle of construction the matched filter and correlator, for the active radar system operating with a broadband noise signal is esteemed. The example of construction a сhan-nel of processing on the basis of micro...
Spectrum of discrete frequency sequence "Welch-10" and "Welch-16"
Amplitude, phase and energy spectrum of a discrete frequency signal in which the number sequences "Welch-10" and "Welch-16" as frequency coding sequences are used is considered.
Taking into account the uncoordinated load when researching the structure of electromagnetic field in the microstrip using the method of ferromagnetic resonance (FMR)
The results of analysis of the causes of sizable discrepancy of data for longitudinal constituent H z obtained experimentally and numerically with the help of Microwave Studio program are given. The author also examined...
The analysis of linear systems in basis of Generalized Transformation
The algorithm for analysis of liner systems in basis, which is the class of transformation, which includes Walsh-Hadamard transformation and Discrete Fourier Transform is suggested.
Device of Radio Frequency Instability Measurements
Introduction. The instability of radio frequency is divided into two types: long-term, due to systematic frequency offset, and shortterm, which is determined by the fluctuation frequency changes. The aim of the paper is...