Noval Method for Fabrication of 3-D Spacer Fabric Composite and Investigation of Mechanical Property
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 9
Abstract
The paper deals with the fabrication and flexural property studies of 3D Spacer fabrics with three different stiffener height, i.e., 5mm, 10mm and 15mm. The specimens were fabricated over two bidirectional woven fabric surfaces of glass fiber reinforced composite face sheet which were mechanically connected with vertical threads. An innovative stitching technique was used. The flexural strength and deflection of fabricated specimens were determined through three point bending test (ASTM C 393-62). A significant increase in flexural rigidity was observed when it compared with other panels, and found it is highest for 3D Spacer fabric with stiffener height 3415mm. Also, the results proved that flexural strength of 3D Spacer fabric increases with respect to the height of the stiffener. Also the results were compared with simply glued sandwich composite of thickness 15mm and found a significant improvement in flexural strength of 3D spacer fabric composite compared to glued composite.
Authors and Affiliations
A. Vivek Anand , G. Venkatesh , P. Anand
Keywords
Related Articles
- EP ID EP158012
- DOI -
- Views 132
- Downloads 0
DESIGN AND ANALYSIS OF AMLA PUNCHING MACHINE
In India, amlas are produced on a large scale which is used for various purposes such as making murraba, pickles, etc. But the method of making murabba by manual method is less efficient and not suitable to ma...
Comparative Study for MCDS and DSR Which Are Used For Packet Forwarding In Ad Hoc Network
Abstract: this paper provides a brief overview of the operation of the DSR protocol; providing only enough detail that the reader can understand the analysis of DSR And comparative study of MCDS and DSR which is us...
The Role of Mobile and Remote Sensing Satellites in Disaster Management
Disaster management aim is human casualty decreasing in natural events such as earth quack, flood, thunderstorms and …. As well as in air crashes, accidents and…. In this paper we use mobile satellite services...
Modeling and Structural Analysis of A Pressure Hull under Dynamic Load
Pressure hulls are the main load bearing structures of naval submarines, and autonomous underwater vehicles (AUVs). A pressure hull is a structure that is designed to withstand the compressive forces associated with hydr...
A Review Paper on Fingerprint Image Enhancement with Different Methods
Image enhancement plays an important role in Fingerprint Recognition System. In this paper, we study the different techniques of enhancement of a fingerprint image in which have been used in previous work. There ar...