NUMERICAL ANALYSIS FOR (H-Q) CURVE OF CENTRIFUGAL PUMPS USING NATURAL AND CONSTRAINED CUBIC SPLINE INTERPOLATIONS
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2018, Vol 41, Issue 3
Abstract
This study is founded by numerical analysis to (H-Q) curve for centrifugal device pump with radial and axial flow fitted firstly with natural spline interpolation and secondly using reserved cubic interpolation spline. Two case studies are used, first one analyzed the (H-Q) curve for axial flow with high specific speed, NS, when the H-Q curve having undesirable dip due to incorrect design of the impeller. The second case study is the parallel operation for two devices (pumps) for different (H-Q) curves, the joint the curves of combination which having important point, until the suitable and working point which reached, the first one doesn’t transfer the flow. The second pump can begin to fund to the flow, it is for this reason that in such a case, the second pump should be started first and then the first pump, locate this point provides us with energy and maintenance costs. The results shown that the normal cubic interpolation which will useful to interpolate these types of curves to obtain the undesirable overshooting points than constrained cubic spline.
Authors and Affiliations
Maher Abd Almeer Kadim, Riyad Jassim Tilefih, dil Hameed Shakir
Keywords
Related Articles
- EP ID EP405961
- DOI 10.26480/jmerd.03.2018.06.08
- Views 52
- Downloads 0
EXPERIMENTAL INVESTİGATIONS ON PERFORMANCE CHARACTERISTICS OF A VARIABLE COMPRESSİON RATIO ENGINE OPERATED ON DUAL FUEL MODE USING DIESEL AND BIODIESEL (OBTAINED FROM COTTON SEED OIL AND RICE BRAN OIL)
Biodiesel is recognized replacement for fossil fuel in compressed ignition engines due to its significant environmental benefits. In this study, an experimental study has been evaluated on a variable compression ratio di...
THE FAULT LOCATING SYSTEM OF THE HIGH-SPEED MAGLEV TRAIN
Analyzing and researching the levitation and guidance sensor fault location system of high-speed maglev train, we developed an offline testing method of sensor fault location system, which can carry on the fast positioni...
CFD SIMULATION OF SAWDUST GASIFICATION ON OPEN TOP THROATLESS DOWNDRAFT GASIFIER
Sawdust is one of alternative energy sources to substitute the fossil fuels. The utilization of sawdust to produce energy can be done through different types of technologies. Gasification is one of techonology that can b...
NONLINEAR BUCKLING ANALYSIS OF A CYLINDRICAL SHELL STRUCTURES
Pressure hulls are designed to stand the hydro static and dynamic bearing when they operate under water. These structures are also applied to naval submarines, remotely operated vehicle (ROV) and autonomous underwater ve...
PARALLEL PROGRAMMING MODELS FOR CALCULATING THE PHYSICAL CHARACTERISTICS OF COMPOSITES
This article reviews the performance of supercomputers. The increase in computational performance is also provided through parallel programming, the development of which is represented by a set of high-level programming...