Numerical and Experimental Analysis for Shape Improvement of a Cruciform Composite Laminates Specimen
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 2
Abstract
The use of composite materials has spread to different applications among which, those using thin sheet plates subjected to biaxial loads are commonly used in the car and aerospace industries. Hence, there is need of a reliable specimen to test these materials under biaxial loads. This reliability depends on measurements that are accurate and repeatable. Thus these measurements depend on the proper design of specimens. This paper reviews the development of cruciform specimens of carbon fibre composite materials and how the geometric shape has evolved. Based on this review, a new geometric shape is proposed. This improvement is based on numerical analysis of the specimen and tests results of experimental measurements carried out using a four piston rig in an orthogonal arrangement. Deformation is measured in the centre of the specimen using strain gauges. By obtaining the principal stresses, it was found that maximum stresses occur in the centre of the specimen.
Authors and Affiliations
Julio Gutiérrez , Alejandro Lozano, Martín Flores
Estimation of the Propagation of the Impact Wave Phenomenon as a Result of a Bullet Impact in PACVD-Modified Textiles
asas<br/><br/>
Impact of Water in the Casting of Cellulosic Film from Ionic Liquid Solutions
This study addresses in detail the role of water in the consecutive steps of film forming: cellulose dissolution, regeneration and drying, and its impact on the mechanical properties of the cellulose film. Prehydrolysis...
Effect of Weave Parameters on the Air Resistance of Woven Fabrics
Effect of Weave Parameters on the Air Resistance of Woven Fabrics
Influence of Rib Structure and Elastic Yarn Type Variations on Textile Piezoresistive Strain Sensor Characteristics
Production parameters have been established to play a fundamental role in dictating the physical characteristics and sensing properties of knitted sensors. This research studied the influence of yarn type and rib fabric...
Fabrication and Characterization of Photochromic Spirooxazine/Polyvinylidene Fluoride Fiber Membranes via Electrospinning
In this study, photochromic spirooxazine material of N-methyl-3,3-dimethyl-9’-hydroxy-spiro [2H-indole-2-[3H] naphtho [2,1-b] [1,4] oxazine] was synthesised. Spirooxazine/PVDF fiber (SPF) membranes with different content...