NUMERICAL ESTIMATES OF ELECTRODYNAMICS PROCESSES IN THE INDUCTOR SYSTEM WITH AN ATTRACTIVE SCREEN AND A FLAT RECTANGULAR SOLENOID
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 2
Abstract
Purpose. To carry out numerical estimates of currents and forces in the investigated inductor system with an attractive screen (ISAS) and determine the effectiveness of the force attraction. Methodology. The calculated relationships and graphical constructions were obtained using the initial data of the system: induced current in the screen and sheet metal; the distributed force of attraction (Ampère force); the repulsive force acting on the sheet metal (Lorentz force); amplitude values of the force of attraction and repulsion; phase dependence of the force of attraction, the repulsive force and the total resulting force. Results. The results of calculations in the form of graphical dependencies of electrodynamic processes in the region under the conductors of a rectangular solenoid of inductor system with an attracting screen are presented. The graphs of forces and currents in region of dent are obtained. In the paper the analysis of electrodynamics processes for whole area under the winding of inductor system with an attractive screen is shown. The flowing this processes in the region of dent a given geometry is presented. Originality. The considered inductor system with an attractive screen and a rectangular solenoid is improved, in comparison with the previous developed ISAS. It has a working area under the lines of parallel conductors in the cross section of a rectangular solenoid, and this allows to place a predetermined portion of the sheet metal anywhere within the working region. Comparison of the indicators of electrodynamics processes in the considered variants of calculation shows an approximate growth of almost 1.5 times the power indicators in the area of the accepted dent in comparison with similar values for the entire area under the winding of the ISAS. Practical value. The results obtained are important for the practice of real estimates of the excited forces of attraction. With a decrease in the dent, the amplitude of the electrodynamics forces being excited is growing proportionally (for example, when the depth decreases by 3 mm, the forces increase more than 2 times). The highest efficiency of force attraction is for sheet metal regions, the dimensions do not exceed the transverse dimensions of the winding branches of the exciting solenoid.
Authors and Affiliations
E. A. Chaplygin, M. V. Barbashova, A. Yu. Koval
Keywords
Related Articles
- EP ID EP486226
- DOI 10.20998/2074-272X.2018.2.09
- Views 68
- Downloads 0
DEVELOPMENT OF NEW CHARTS OF CAPACITANCE-RESISTANCE DEFENSE OF HIGH-VOLTAGE CAPACITORS OF POWERFUL CAPACITY STORES OF ENERGY FROM EMERGENCY CURRENTS
Purpose. Development of new charts of capacitance-resistance defense of high-voltage capacitors of powerful capacity stores of energy (CSE) from emergency large impulsive currents (LIC) at the electric hasp of one of con...
IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
Purpose. To develop the imitation model of the frequency converter controlled high-speed induction motor with a squirrel-cage rotor in order to determine reasons causes electric motor vibrations and noises in starting mo...
METHOD FOR VOLTAGE CONTROL IN CHARGE CIRCUIT OF ELECTRIC DISCHARGE INSTALLATIONS WITH TWO CAPACITORS UNDER NONZERO INITIAL CONDITIONS
Purpose. To analyze the transient processes in the charge circuit of electric discharge installations with two capacitors, taking into account the change in the initial conditions of such processes (initial voltage on th...
RESEARCH ON TRANSIENTS AND CHOICE OF OPTIMUM PARAMETERS OF SWITCHING ELEMENTS FOR AN ELECTROMAGNETIC VALVE CONTROL FOR COMBUSTION ENGINE EXHAUST SAMPLING
The article introduces a classical-method-based analysis procedure for transients in the control cascade of an electromagnetic valve for combustion engine exhaust sampling. Analytical expressions for currents and voltage...
A HIGH SENSITIVE MICROWAVE MEASURING DEVICE OF THE MOISTURE CONTENT IN THE NON-POLAR DIELECTRIC LIQUIDS BASED ON AN INHOMOGENEOUS STEP COAXIAL RESONATOR
Purpose. Objective is to create a moisture meter for non-polar liquid dielectrics with low volumetric moisture content of more than 10 3 %. Methodology. Moisture measuring is based on dielcometric method. It is implement...