NUMERICAL INVESTIGATION OF SHELL AND TUBE HEAT EXCHNGER FOR HEAT TRANSFER OPTIMIZATION: A Review
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 0, Vol 5, Issue 1
Abstract
An un-baffled shell-and-tube heat exchanger design with respect to heat transfer coefficient and pressure drop is investigated by numerically modelling. The flow and temperature fields inside the shell and tubes are resolved using a commercial CFD package considering the plane symmetry. A set of CFD simulations is performed for a single shell and tube bundle and is compared with the experimental results. The results are found to be sensitive to turbulence model and wall treatment method. It is found that there are regions of low Reynolds number in the core of heat exchanger shell. Thus, k-ω SST model, with low Reynolds correction, provides better results as compared to other models. The temperature and velocity profiles are examined in detail. It is seen that the flow remains parallel to the tubes thus limiting the heat transfer. Approximately, 2/3rd of the shell side fluid is bypassing the tubes and contributing little to the overall heat transfer. Significant fraction of total shell side pressure drop is found at inlet and outlet regions. Due to the parallel flow and low mass flux in the core of heat exchanger, the tubes are not uniformly heated. Outer tubes fluid tends to leave at a higher temperature compared to inner tubes fluid. Higher heat flux is observed at shell’s inlet due to two reasons. Firstly due to the cross-flow and secondly due to higher temperature difference between tubes and shell side fluid. On the basis of these findings, current design needs modifications to improve heat transfer.
Authors and Affiliations
Jaya Verma Negi
Parametric Analysis of Process Parameters of Laser Cutting Machine( Mazak Hyper Gear 510 ) By Using Anova Method On SS 304
Laser cutting is mostly a thermal process in which a focused laser beam is used to melt material in a localized area. A co-axial gas jet is used to eject the molten material from the cut and leave a clean edge. A...
OPTIMAL LOCATION OF TCSC AND SVC DEVICES TO ENHANCE POWER SYSTEM SECURITY
Contingency analysis in power system security is an important tasks in emerging energy management systems. Contingency ranking using the performance index value is a method for the line outages in a system, which...
Job Shop Scheduling Using Modified Simulated Annealing Algorithm
Timely and cost factor is increasingly important in today’s global competitive market. The key problem faced by today’s industries are feasible allocation of various jobs to available resources i.e., machines (Sch...
THE INFLUENCE OF PROCESS PARAMETERS ON MICROHARDNESS AND MECHANICAL PROPERTIES OF FSW ALUMINIUM 5083 ALLOY BUTT JOINT
Recently the air craft and military industries widely have been using aluminium alloys particularly because of their fine strength to weight ratio. However in compare with steels they represent welding difficulties and...
A STUDY OF THE EFFECT OF FOUR DIFFERENT MEDICINES ON THE PATIENTS WITH HIGH BLOOD PRESSURE USING ANALYSIS OF VARIANCE (ANOVA)
High blood pressure is a major determinant of risk for Coronary Heart Disease (CHD) and stroke, leading causes of death in anywhere of the world. However, the factors which increase blood pressure levels in human...