Numerical Optimisation of Heat Transfer using Pulsating Jet Array with Phase Shift
Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 6
Abstract
The advancement in science had led to highly complicated electronic devices and at the same time the size of such devices is getting reduced day by day. The amount of heat generated by these devices is increasing in par with its complexity. The efficiency of electronics devices decreases with increase in temperature. The cooling of these devices to their normal working temperature is a great challenge since the area available for heat transfer will be very less and there is restricted movement of air. This paper deals with jet impingement cooling, in which high velocity jets are used for removal of heat from a surface. The jets are arranged in the form of a staggered array and are pulsating in nature. To increase the turbulence in the flow domain the jets are pulsated at a phase shift. The study is carried out at different frequencies. The objective of this study is to compare the heat transfer at different combinations of frequencies and angles of phase shift and find the combination at which the heat transfer is maximum. The study is done using computational fluid dynamics software tool ANSYS Fluent version 14.
Authors and Affiliations
Prof. Sabu Kurian, Jassim Kakkattil, Dr. Biju N, Dr. Tide P S
Keywords
Related Articles
- EP ID EP224890
- DOI -
- Views 121
- Downloads 0
A Battery/Supercapacitor Hybrid Combination in Uninterruptible Power Supply (UPS)
This study presents a design of internal parameters of supercapacitor using charging/discharging characteristics of a battery. We aim at investigating the optimal supercapacitors-battery combination .This investigation i...
Performance Check and Relevant Design Modifications of RUPD under Impact Loading
Under-running of passenger vehicles is one of the important parameters to be considered during design and development of truck chassis. "Rear under run protection device (RUPD)" is used to offer safety in case of rear im...
Design and Fabrication of Mechanical Lift for Transportation
Lift is a simple mechanical device used to raise element or object from ground level to a certain height to perform a specific work with maximum load and minimum efforts. This project describes the design as well as anal...
Automated Raspberry Pi Based Rural Bus with IoT Interfacing
The paper discusses about the techniques involved in controlling n bus interface with IOT. Due to the interfacing of IOT, all the control parameters get involved such as fuel level, location, amount of passengers, ticket...
A Survey on Retinal Area Detector for Classifying Retinal Disorders from SLO Images
The retina is a dainty layer of tissue that lines the back of the eye within. It is situated close to the optic nerve. The reason for the retina is to get light that the focal point has centered, change over the light in...