OBTAINING OF LOCALLY OPTIMAL SOLUTIONS BY COMBINING PROPERTIES OF MIXTURES FOR FOUNDRY MANUFACTURE
Journal Title: EUREKA: Physics and Engineering - Year 2018, Vol 0, Issue 6
Abstract
The aim of research is establishment of the relationship between the various properties of the mixture with liquid glass and hardener for the foundry industry – survivability, compressive strength and crumbling. Such an interrelation in the form of an adequate functional dependence makes it possible to assess the quality of the mixture for its compliance with the specified requirements, without resorting to additional laboratory measurements. It is very important to evaluate its suitability for the manufacture of rods, in particular, to meet the stringent requirements of production. Using the combined procedure of active and passive experiments, a regression equation was obtained describing the dependence of the mixture survivability on compressive strength and crumbling. It has been established that compressive strength is a more significant factor influencing survivability compared to crumbling, and it is almost 3 times (а1=0.36>а2=0.13). Analysis of the resulting regression equation shows that both of these factors have a positive effect on the survivability of the mixture – with an increase in compressive strength and crumbling, the survivability increases. In part, this conclusion requires confirmation in relation to crumbling, since the fact of a positive effect on survivability may be in doubt. By applying the procedure of comb analysis to the obtained regression equation, in order to describe the response surface, locally optimal solutions are established in the form of a ridge line. This line represents the optimal combination of compressive strength and shedding in the sense of ensuring the maximum survivability of the mixture. The corresponding ratios can be used as a nomogram, which allows to evaluate the ratios of the desired properties of the mixture, if it is fundamentally important to assess its quality by a set of properties.
Authors and Affiliations
Vadim Dotsenko, Viktoria Boichuk, Yevhenii Tsybulskyi, Vadym Fedorenko
Keywords
Related Articles
- EP ID EP669045
- DOI 10.21303/2461-4262.2018.00795
- Views 211
- Downloads 0
METHOD FOR DETECTING ANOMALOUS STATES OF A CONTROL OBJECT IN INFORMATION SYSTEMS BASED ON THE ANALYSIS OF TEMPORAL DATA AND KNOWLEDGE
The problem of finding the anomalous states of the control object in the management information system under conditions of uncertainty caused by the incompleteness of knowledge about this object is considered. The method...
INVESTIGATION OF THE NON-EQUILIBRIUM IMPACT ON THE PROPERTIES OF A SUPERCONDUCTOR USING A PLASMA SUPERCONDUCTIVITY MECHANISM
The results of theoretical studies of a semiconductor structure are presented which, upon irradiation with a particle stream or light, transforms into a superconducting phase state. The work is carried out: – analysis...
METHOD OF CONSTRUCTING AN ATTRIBUTE DESCRIPTION OF THE BUSINESS PROCESS "AS IS" IN THE PROCESS APPROACH TO ENTERPRISE MANAGEMENT
The problem of constructing an attribute description of a business process with the automated formation of process models “as is” using logs of information systems in which the tracks of individual processes are not iden...
ANALYSIS OF UKRAINIAN DIAGNOSTIC ARTICULATION TABLES
The problem of creating Ukrainian diagnostic tables for the testing of hearing impaired people has not yet been resolved. The article dedicated to the linguistic material of existing articulation tables. The basic method...
RESEARCH ON USE OF LOW CONCENTRATION INVERSE SOLUBILITY POLYMERS IN WATER FOR HARDENING MACHINE COMPONENTS AND TOOLS
There is an optimal water concentration of inverse solubility polymers ( 1 %) where in many cases film boiling is absent. Based on accurate experimental data of French and data of authors, it was shown that during quench...