Optimisation of the technology of smelting and refining of steel into hot rolled sections on an innovative production line
Journal Title: Journal of Metallic Materials - Year 2019, Vol 71, Issue 1
Abstract
Experimental investigations have been carried out to optimise the secondary steel treatment technology in a ladle in order to ensure the required quality of steel intended for hot rolling of sections on an innovative line, with a reduced number of rolling stands characterised by a higher intensity of plastic processing. Experimental heats were made according to various steel deoxidation variants during secondary treatment and continuous casting of two steel grades. Continuous ingots were used to hot roll sections of various cross-sectional sizes. Based on the results of metallurgical, microscopic and mechanical tests of the sections, guidelines for the optimal continuous ingot production technology for hot rolling of sections on an innovative production line were developed.
Authors and Affiliations
Mirosław Michałowski, Stanisław Klusek, Piotr Dudkiewicz, Paweł Kamiński, Sylwia Mandziak, Mariusz Adamczyk, Ireneusz Szypuła, Bogdan Zdonek, Artur Żak
Keywords
Related Articles
- EP ID EP663364
- DOI 10.32730/imz.2657-747.19.1.2
- Views 177
- Downloads 0
Optimisation of the technology of smelting and refining of steel into hot rolled sections on an innovative production line
Experimental investigations have been carried out to optimise the secondary steel treatment technology in a ladle in order to ensure the required quality of steel intended for hot rolling of sections on an innovative lin...
A new set of certified reference materials of the chemical composition of the iron ores
The study assumed the production of ten certified reference materials of the chemical composition of raw ores, magnetite and hematite concentrates and pellets. The raw materials were obtained from Ukraine, Russia, Liberi...
Optimization of the heat treatment process to obtain the required distribution of mechanical properties in the rail head of pearlitic rails
The paper presents metallurgically based approach allowing the design of the parameters of the pearlitic rail head heat treatment to obtain the targeted mechanical properties. The described solutions enable predicting th...
Microstructural aspects of long-term ageing of martensitic 9% Cr steel with and without boron addition
The study covered 9% Cr martensitic steels – X10CrMoVNb9-1 (P91) and X13CrMoCoVNbNB9-2-1 (PB2) after long-term ageing at the temperature of 620°C and soaking time up to 50,000 hours. The microstructural investigations of...