Optimisation of WEDM Parameters Using Taguchi Method and Fuzzy Logic Technique for Al-6351
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Optimization is one of the techniques used in the manufacturing sector to achieve best operating conditions, which is essential for industries to provide quality stuff at subordinate outlay. This paper aims investigation and optimization of Wire electronic discharge machine (WEDM) parameters using optimization technique i.e. Taguchi method and Fuzzy logic. Three parameters preferred are PON (Pulse ON), POFF (Pulse OFF), and FR (Feed Rate). L9 orthogonal array and fuzzy logic are selected to study the effect on main factors. The effect of input parameters and relationship between them to the material removal rate (MRR) and optimum surface roughness are calculated by using Taguchi method and Fuzzy logic technique
Authors and Affiliations
DEEPAK BHARDWAJ, ANKIT SAXENA
Keywords
Related Articles
- EP ID EP280238
- DOI 10.24247/ijmperdfeb201879
- Views 74
- Downloads 0
Investigation of Hot Corrosion Behaviour of Uncoated and WC-17co Coated Samples in Aggressive Molten Salt Environment
Hot corrosion is usually a significant issue in power plant’s boilers. The alloys and metals get corroded, once exposed to high temperature corrosion in air, or in actual boiler environment in power plants. In order to p...
Design and Development of Wireless Operated Low Cost Prosthetic Hand by Fused Deposition Modeling
In present days, unfortunately, many of the people were losing their hands in different situations. The human body parts, which replaced by the artificial parts are known as prosthetic parts. Recently, the advent of 3D p...
Effect of Screen Mesh Wick and Al2o3 Nanofluid Concentration on Circular Heat Pipe Performance
It is a passive heat transfer device that is used to remove the amount of heat from the heat source. The behavior of screen wick and nanofluid to improve the performance of a heat pipe.Al2O3 /DI-water based nanofluid is...
The Design and Development of Transitional UAV Configuration
The transitional aircraft configuration is designed and developed, with a transitioning propulsion mounts from a hover mode to forward flight mode. Calculating the appropriate values of design parameters and performance...
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...