Optimization and Prediction of Motorcycle Injection System Performance with Feed-Forward Back-Propagation Method Artificial Neural Network (ANN)
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 2
Abstract
Optimization and Prediction of Motorcycle Injection System Performance with Feed-Forward Back-Propagation Method Artificial Neural Network (ANN) La Ode Ichlas Syahrullah and Nazaruddin Sinaga DOI : 10.3844/ajeassp.2016.222.235 American Journal of Engineering and Applied Sciences Volume 9, Issue 2 Pages 222-235 Abstract This research studied the use of Artificial Neural Network (ANN) using feed-forward back-propagation model to optimize and predict the performance of a motorcycle fuel injection systems of gasoline. The parameters such as speed, throttle position, ignition timing and injection timing is used as the input parameters. While the parameters of fuel consumption and engine torque is used as the output layer. Lavenberg-Marquardt model type with train function tanh sigmoid and 25 neurons number is used to generate the target value and the desired output. Variation of ignition timing as optimization variable in a wide range of speed and throttle position is used in experimental tests. ANN is used to investigate the prediction of performance motorcycle engines and compared with the test results. Results showed that the operation of ANN in predicting engine performance is very good. From the test results obtained a smooth contour MAP compared to the initial state. The prediction result and performance test show a good correlation in small error value of training and test that is regression with range 0.98-0.99, mean relative error with range 0.1315-0.4281% and the root mean square error with range 0.2422-0.9754%. This study shows that the feed-forward back propagation on ANN model can be used to predict accurately the performance of a motorcycle engine injection system. Copyright © 2016 La Ode Ichlas Syahrullah and Nazaruddin Sinaga. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. http://thescipub.com/abstract/10.3844/ajeassp.2016.222.235
Authors and Affiliations
La Ode Ichlas Syahrullah, Nazaruddin Sinaga
Keywords
Related Articles
- EP ID EP203589
- DOI 10.3844/ajeassp.2016.222.235
- Views 98
- Downloads 0
Finite-Element Numerical Simulation of the Bending Performance of Post-Tensioned Structural Glass Beams with Adhesively Bonded CFRP Tendons
Abstract In this study, a Finite-Element (FE) numerical investigation is carried out on laminated glass beams with Carbon Fibre Reinforced Polymer (CFRP) adhesively bonded post-tensioning tendons. Taking advantage of pa...
High-Speed for Data Transmission in GSM Networks Based on Cognitive Radio
Abstract This paper mainly studies data transmission DT rate in the modern communication systems. Increasing the need to improve the sensitivity of the control systems to detect low signals weak capacity density in view...
Interpretation of Double Langmuir Probe I-V Characteristics at Different Ionospheric Plasma Temperatures
Interpretation of Double Langmuir Probe I-V Characteristics at Different Ionospheric Plasma Temperatures Shankar Bhattarai DOI : 10.3844/ajeassp.2017.882.889 American Journal of Engineering and Applied Sciences Volum...
Optical and Structure Analysis of ZnO:Al Film
Optical and Structure Analysis of ZnO:Al Film Neilo Marcos Trindade, Michel Chaves, José Roberto Ribeiro Bortoleto, Américo Sheitiro Tabata and José Humberto Dias da Silva DOI : 10.3844/ajeassp.2017.790.798 American J...
Factors Affecting Chemo-physical and Rheological Behaviour of Zr44-Ti11-Cu10-Ni10-Be25 Metal Glassy Alloy Supercooled Liquids
Factors Affecting Chemo-physical and Rheological Behaviour of Zr44-Ti11-Cu10-Ni10-Be25 Metal Glassy Alloy Supercooled Liquids Apicella Antonio and Aversa Raffaella DOI : 10.3844/ajeassp.2016.98.106 American Journal of...